2007 - 2013 Nissan Altima Radio Install

preview_player
Показать описание
Parts linked in the description below!

Watch a full tutorial as a 2007 Nissan Altima will have a brand new Boss Apple Carplay Double Din Touch Screen Radio installed. We will also be retaining the steering wheel volume controls with the new radio.

Note: This Altima was not equipped with BOSE audio. If you have Bose, we will link those variations in parts in the description below to retain it with you new radio!

This video applies to Nissan Versa models for years 2007, 2008, 2009, 2010, 2011, 2012, and 2013. This video also includes dash trim and stereo removal, wiring, installation, and testing.

To see the backup camera install, click here:

To see the amp and sub install video, click here:

For the Crux SWRNS-63U Adapter unboxing, click here:

If you have any questions, leave a comment below! Be sure to like and subscribe!

Install Parts Used (Amazon Associate Paid Links):
--If you purchase the Crux harness kit, the Metra 40-NI12 is not needed.
***Alternative flush Mounts--

NOTE: If you have factory BOSE audio, you will need these parts as there is not a Crux harness available to support this Gen Altima with Bose:

*Disclosure: As an Amazon Associate I earn from qualifying purchases*
Рекомендации по теме
Комментарии
Автор

Parts used linked in the description of the video!

ProvoBeastAudio
Автор

I have a Nissan altima S sedan 2011 and I'm interested on replace the stock CD radio, but no audio controls included on the steering wheel, could be a problem please advise. I saw the video great tutorial.

JoseTorres-yjzt
Автор

Great informative video! I’m not quite sure of doing all that myself, what’s an approximate cost to have someone do this for me?

emilydoan
Автор

Very informative step by step process! 👍

rus
Автор

Great video helped me a lot. 1 question the newer units require you to tap the Emergency brake wire. Any advice on accessing this on an 08 Altima with a foot pedal e-brake? I know one of the points is the plug behind the instrument cluster. Very hard to access.

BenNeely-zr
Автор

Swi-cp2 pac also works with bose system

rhurtadorh
Автор

Thank you for the excellent video. I am replacing a factory Bose system, and this video states that the Crux wiring harness adapter will not work but your video of the Crux Harness unboxing says that the harness should work with the Bose system if you use the RCA pre outs. What is the latest and which parts should I buy because the PAC C4RAD is no longer available anywhere? Thank you for your assistance and the awesome video.

jsarambo
Автор

I just installed an aftermarket radio to my altima 13 and there is no sound. I've seen videos where mention the amp cable not being powered. How can i fix it.

nikogp
Автор

1:55 what are all the other plugs in the radio for?
Mine only uses 2, the main one & the antenna one.

xCARPx
Автор

How is this with directions? I’m getting one installed in my 2012 Nissan Altima and I’m worried because the screen is somewhat low so I would almost have to look down to see the directions

Anonymous_McNugget
Автор

My screen works sometimes and sometimes it doesn’t. Recently it’s been not working more than it does. Also the volume fluctuates and the sound quality drops after playing music for a bit. Trying to figure out what to do from here

jamian
Автор

Is it necessary to replace the speakers when installing a new head unit in this vehicle?

harv
Автор

Thanks so much! I just have a quick question regarding the blue wire that's attached to the antenna housing.. what does that get attached to? Thanks for a great video!

SalvatorePlano
Автор

hello great video, but whats about the quality sound? its great o definitly find other?

guillaumelandaverde
Автор

i see the ring terminal you have of the ground but it looks like you soldered the ground together when soldering the harnesses. where is that pigtail/ring terminal coming from? the unit-side plug or the car-side (white) plug

luismancilla
Автор

I have a 2016 Altima - can I link up the factory camera? Is there is a kit for that?

ricksbuchner
Автор

how much would it cost to have someone do it for me?

bodyguard
Автор

I have a 2011 altima coupe, where exactly is the bluetooth by bass location in the trunk??

ozz_e
Автор

I have a 2010 Altima S sedan. It's an old car but I'm still in it all the time. Various parts of the system are starting to go out so I want to replace it. Im going with a 'mech-less ' stereo. Don't need navigation or all the extras. Just a factory compatible system with Bluetooth so I can play from my phone. Crutchfield recommended a JVC KD-X280BT. Can you tell me the additional parts I need for installation? My car does not have navigation & there are steering wheel controls.

ejack
Автор

I’m getting the same model radio except I’m getting the one without the cd port will the set up b the same

zaemargarrett