To Save Shipping Cost, The Container Was Overloaded Heavily, Resulting In Expansion And Deformation

A Little Wisdom Helps You Become Smarter !

Using a forklift equipped with a parallel clamp to strike a deformed container that is overloaded with goods is extremely inappropriate !

From The Perspective Of Safety :

- The impact operation is likely to cause the forklift to lose its balance and tip over, which will pose a serious threat to the life safety of the operator. It should be noted that the forklift is designed for loading, unloading and transporting goods, not for impact operations !

- When the container is deformed and overloaded with goods, its internal structure may be unstable. At this time, the impact is very likely to cause the goods to collapse, causing damage to the surrounding personnel and equipment !

From The Point Of View Of Equipment Damage :

- Such impact behavior may cause damage to the forklift itself, involving parts such as the frame, tires, hydraulic system and the installed parallel clamp !

- The impact on the container may further aggravate the damage of the container and cause irreparable structural damage !

If a deformed container that is overloaded with goods is encountered, the correct treatment methods should be adopted, such as using appropriate tools and equipment to unload the goods, conducting safety evaluation and maintenance on the container and other professional operations, instead of adopting this dangerous impact behavior !

The Following Is The Relevant Information About Installing A Parallel Clamp On A Forklift :

Pre - Installation Preparations :

- Check the forklift
Ensure that the forklift is in good condition, including checking whether the hydraulic system of the forklift is working properly and the rated load - bearing capacity of the forklift. Since the use of the parallel clamp will impose an additional load on the hydraulic system of the forklift, the performance of the forklift itself must meet the requirements !

- Confirm the specifications of the parallel clamp
Select a parallel clamp of appropriate specifications according to the model of the forklift and the operation requirements. Parallel clamps have different sizes, load - bearing capacities and types of clamping arms. It is necessary to ensure that it matches the connection dimensions of the forklift and can meet the type and weight requirements of the goods to be carried !

Installation Steps :

- Connection device
Most parallel clamps are installed on the fork carriage of the forklift through a special connection device. Generally, first fix the connection device on the fork carriage, and then connect the parallel clamp with the connection device. This process may require the use of some tools, such as bolts and nuts, and the operation should be carried out according to the installation instructions provided by the manufacturer to ensure a firm connection !

- Hydraulic system connection
The parallel clamp needs to be connected to the hydraulic system of the forklift to achieve the opening and closing actions of the clamping arms. This usually involves connecting the hydraulic pipeline of the parallel clamp to the hydraulic output interface of the forklift. During the connection process, pay attention to the sealing of the pipeline to prevent hydraulic oil leakage !

- Debugging
After the installation is completed, the parallel clamp needs to be debugged. This includes checking whether the opening and closing actions of the clamping arms are smooth, whether the designed clamping range can be achieved, and whether there are abnormal noises or jams during the actions. At the same time, test the working performance of the parallel clamp under different load conditions to ensure its safety and reliability !

Safety Precautions :

- Train the operators
A forklift with a parallel clamp installed is different from an ordinary forklift in operation. Operators need to receive special training to be familiar with the operation methods, safety precautions and emergency handling measures of the parallel clamp !

- Follow the load - bearing limits
Although the parallel clamp expands the operation functions of the forklift, the rated load - bearing capacity of the forklift itself and the designed load - bearing range of the parallel clamp cannot be exceeded. Otherwise, it may lead to equipment damage or safety accidents !

- Regular maintenance and inspection : Regular maintenance and inspection should be carried out on the forklift with the parallel clamp installed, including checking whether the connection parts of the parallel clamp are loose, whether the hydraulic system is normal, and whether the clamping arms are worn or deformed, so as to ensure that the equipment is always in good working condition !

[CrowSpirit]

Destroyed a $20, 000 dollar forklift to save a $2, 500 hundred dollar shipping container. 🤣

[janetlewis]

Looks like someone needs anger management. Mr Bill

[johncolette]

Is he trying to reposition the container, tip it over, or put a hole in it?

[technomax]

Next video: Container ship losing cargo in the sea after containers start colapsing under the weight.

[Waverunner]

He’s destroying the hydraulic cylinders on the forklift each cylinder repair cost approximately between 5 to $7000.dollars with installation, crazy people everywhere.

[jastratton-ku]

God, l hope the people inside can still breath ok after all

[GggGgg-op]

Погрузчик стучит снизу вверх, как будто выпрямляет что-то

[VictorTaylor-tl]

Fork lifts today would not allow you to do that, they're designed to cut off if impacted to hard

[ramennaidoo]

How often do you have to repair the forklift. Penny wise, pound foolish 😮😮😮😮

[charlessudler]

U would be shocked some of things they get in there and ship weight is never considered I've seen people sending them ovee sees with trucks cut in half tractors backhoes im surprised we haven't seen them bustin open in transit all over the highways they load the hell out of those containers with no reguard for safety weight its crazy dangerous

[packrcch]

yes, they often double stack 55 gallon drums in those . other overloaded containers are then stacked on top of this one . that’s were the deformation happens

[walterrichards]

I agree that isn't the best way to operate a forklift, but the boss said to unload the trailer. Anyway, it's not My forklift, so I'm gonna do whatever it takes to get th' job done!

[robertlopezjr.]

What luxury SUV, flat screen TV's...okay..!!!

[joseamintasrochafilho]

Prejuízo na hidrelétrica, lataria e mecânica da empilhadeira e do contêiner

[KanikaOumar-yi]

Non ils entrain de redressé le container se tout😎😎

[robertlopezjr.]

Mr George. Oh no too much monny..!!!

[xelzbrod...]

The guy just can't see that there's a truck in front of him.

[cslloyd]

Ok, fixed that dent. Now need to repair the fork lift

[ماجكموزجوني]

Please be careful... My eggs are in the middle of the container 😢😢😢😢😂

[joewade]

He is compacting the load to fit more in