SRWE Practice PT Skills Assessment (PTSA) - Part 1

Switching, Routing and Wireless Essentials v7.0 SRWE -SRWE Practice PT Skills Assessment (PTSA) - Part 1

[MailonOfficial]

Saludos Christian,
estoy trabajando en este módulo pero en la parte de usar el comando de encapsulation me da un error referente a la interfaz de g1/0/1 y dice aborting al final. Que podría haber hecho mal?

[iwantswigun]

9:10 how to check to which port of router is switch connected? When I click on red triangles right and left button of mouse only window with allert appears and says "Disconnect is locked"

[oeksnadr]

So many thanks for your help, time and job!

[ptahrightknowledge]

you are awesome thanks for putting video in English for us

[joshuasebetlela]

Hey Christian, what do I do when i get the text below?

MSW-1(config)#int range g1/0/1-2
trunk encapsulation dot1q
% Interface range command failed for GigabitEthernet1/0/1
% Command failed on interface GigabitEthernet1/0/1. Aborting

[Isaac-nrhj]

hola christian, buenas noches estoy haciendo la misma práctica y al momento de poner el comando encapsulation me da un error, y no sé qué hacer

[jemrycainc.magdua]

thank you so much for this you save me because of you i got pass this semester hehe

[aidanapker]

great video except it didn't let me set the encapsulation on the ports or port-channels. I did everything else and the pings were unsuccessful. i followed everything carefully. any tips?

[NightFalcon]

when i go to int g0/0/1.40 and the others 50/60 ect. i can't add ip address it says the ip address overlaps with another vlan, i searched some people say i need to do in int port-channel 1/2 switchport mode trunk encapsulation dot1q in the multilayer switch but when i do that it does not want to accept the command. do you know how to fix ?

[ejtechnology]

Hey amigo! Hay una versión nueva de esta topología con IP empezando en 10. ¿pronto subirás vídeo con esa versión? Muchas gracias de antemano.

[adikok]

i have a problem, when i try to enter edge router, ots says that cisco is wrong password, and i cant enter

[eluizeramadeusdeleondeleon]

Hey bro!!! really thank you for your time, creo que hablas español tambien jajaja, Gracias :3

[jademeetsworld-]

I have a complete different table than yours but I am trying to work along with your version. In step 2 of configure trunking on the ether channels around 27 minutes and 6 seconds of the video. I enter the command and receive the following feedback, is there any possible way to tell me what is wrong and what I can do to fix it? Here is what i have enter and the feedback:

MSW-1(config-if-range)#int range g1/0/1-4
trunk encapsulation dot1q
% Interface range command failed for GigabitEthernet1/0/1
% Command failed on interface GigabitEthernet1/0/1. Aborting

[-vc]

Can you write here password for RTR-1?
I enter password "cisco" but it did not work

[samkelisothwala]

Do you have an idea how the final skills exam will look

[khodosgames]

Muchísimas gracias por aportar el pkt tío!

NetACAD no es tan buena persona! Jajajaja, saludos !!

[nirmaladevi]

i want to password for user identification

[aaaronfluo]

Thanks for your time but this is a messed man