How to Strip the Ends of MICC Cable Using a Joy Stripper, Rotary Stripper, Key (Pyro or MI Cable)

How to strip the ends of MICC (make off MI or Pyro) cable in 3 different ways. I demonstrated stripping MICC cable using a joy stripper a rotary stripper and a key stripper. It is important to master the skills required to strip MI cable as it is a required of City and Guilds and EAL Electrical qualifications. I give step by step instructions on the 3 different techniques. In the next video in this series I will show you how to gland the end of the MICC cable.

== 🕐 Time Stamps - Cut to the action 🕕 ==

00:00 - How to strip MICC cable
00:12 - MICC cable mineral insulated cable (MI or Pyro cable)
00:35 - Different sheath colours of MICC cable red, orange and white (MI or Pyro cable)
01:59 - Stripping back MICC cable using a joy stripper, rotary stripper and key stripper
03:04 - Preparing the end of MICC cable before stripping
03:47 - Removing the outer PVC on MICC cable (MI or Pyro cable)
04:47 - Construction of MICC cable (MI or Pyro cable)
06:38 - The technique for stripping MICC cable with a joy stripper
11:26 - The technique for stripping MICC cable with a rotary stripper
15:31 - The technique for stripping MICC cable with a key stripper

Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.

You can follow me day by day on Facebook, Instagram and Twitter lookout for "GSH Electrical.

#GSHElectrical #Electricaltrainingvideos #micc

[GSHElectrical]

== 🕐 Time Stamps - Cut to the action 🕕 ==
00:25 - MICC cable mineral insulated cable (MI or Pyro cable)
00:48 - Different sheath colours of MICC cable red, orange and white (MI or Pyro cable)
02:12 - Stripping back MICC cable using a joy stripper, rotary stripper and key stripper
03:17 - Preparing the end of MICC cable before stripping
04:00 - Removing the outer PVC on MICC cable (MI or Pyro cable)
05:00 - Construction of MICC cable (MI or Pyro cable)
06:41 - The technique for stripping MICC cable with a joy stripper
11:39 - The technique for stripping MICC cable with a rotary stripper
15:44 - The technique for stripping MICC cable with a key stripper

[montystelevision]

A beautiful brace of videos about what is arguable the finest cable around. Oozing Health and Safety at its best, MICC tests true craft and divides the corner cutters from the diligent. I love a bit of MICC. My JoiStripper was my Dads and I treasure it.

[AllenTaylor-lubu]

Back in the day Coventry City Council were one of the biggest users of MICC (according to BICC). We installed miles of it and I worked for one electrician who could straighten it to perfection even when pulled through multiple walls. His preferred method (which the apprentice had to copy) was a stripping bar made from 1/2 handle off a plastic crate, the reason was it produced beautiful, straight, tight coils of copper which were kept in a 'Tatt' box....

[johnwaby]

Brilliant. Used to love working with MI cable . Don't use it much now .

[oyleyhands]

Luxury man...😁 I was never issued with any form of stripping tool, had to use my side cutters, working around the cable.

[stephenlittle]

I loved my key stripper. And yes I have used my screwdriver before when I could'nt find my key stripper. Good old days. And I have done mains size MICC with it.

[roycadge]

So the key technique looks just like the old way of opening the cans of ham, spam etc 🤔 great video

[Boxferret]

I made up a tool a while ago to help grip various cables or small pipes while working them, Basically cut some steel pipe about 3 4 inches long, then slit down the length for 2 halves, and weld into some cheap mole grip jaws so you have a T shaped tool - very useful for gripping micc cables

[davidroche]

Ahhhh, the dreaded spam knew your evening meal easing going to be memorable when you saw that as stripping MICC with one would be

[David-dzjb]

I so remember all these methods, the joystick was always my favourite tool, the blue stripper was a nightmare to get set up right, the spam key method was used when we forgot the the proper tools
always remember not to ring the pyro too deeply when using the spam key as it can break away before you have reached it and then your in trouble, don't ask how I know. Not my favourite cable to install specially on really bad uneven brickwork. We didn't have lasers in my day just string lines that didn't always show up on rubbish walls. Installed many miles of this stuff in petrol stations most of it in the underground ducts & retired now but it brought back a few memories seeing this.

[cumberland]

Brings back memories of my apprenticeship, having competitions between ourselves to see who can strip the most copper with a T bar without snapping the copper

[stevensmith]

Learn how to do it with a tommy bar or large flat head screwdriver and a ringing tool, then you can make off any size.
With large pyro, sometimes the pots don't want to go on after ringing, just get a flat file and rub gently on the end of the copper sheath to remove the burr, now the pot will slip on easily.DODDLE.
remember practice makes perfect.

[robertwilliamson]

Ah the good old days of pyro young guns don't know how easy they have it Like to have seen your face after you used the key that Def worked better than you expected lol

[playthegame]

How do you connect a fan extractor to down lights?

[jeremykemp]

So why does it draw in moisture? Is there a reason for this?

[raychambers]

Very nice making off on bench, now try up the top of a ladder in the semi dark .lol.

[neiltrevatt]

My old boss had all 3 of those strippers in his tool box but always ended up using his T bar couldn’t handle the

[stevensmith]

I've never made off an fp200 end
Piece of piss compared to a pyro end!