EASYSHED Garden Shed Build from www.EASYSHED.com.au

They say its a 5 step assembly, I say more like 500 steps!

[annaahiru]

We just received our easy shed. It's great that you've put up a video of your experience, I've learned it's going to take a bit more than i thought to get it together! Thank you.

[seanmack]

My 7x7x2.6 was put up in same time😂🤣 I dread the old garden sheds mate, you did well 👌 should come with a free bottle of Scotch 😂

[mickyp]

Fantastic! Realistic presentation of what it actually takes to put these things together. Much appreciated!

[paulinglis]

Excellent video mate! on our 2nd day of installing our 4.5 x 3 easy shed, not so easy as they make it out to be.

[lesteryip]

I'd wish I have watched your video before the purchase. Totally agree with your comments. The shed quality is no problem but the design of assembly can be better. Playing aroung with those self-drilling screws with no pre-drill holes are very frustrating.

[natking]

Thanks for your video. We have also taken 3 days and our experience sounds quite similar to yours. Glad to know it's not just us!

[gisella]

Thank you, I am waiting on a bike shed from Easy Shed. I hope it's smaller size is easier for me to put up virtually on my own. You video is a good reference point. Female power works for me.

[tassie]

3 weeks for delivery - not bad.
I've been waiting over 4 weeks now for mine and its still not in sight. Its been traveling down the Hume Hwy from Albury to Melbourne for the last 4 days 😖
I figured it must be on a sleigh being drawn by a couple of Chihuahuas

[silviofontana]

I have just started assembling my 4.5m X 3.0m Easy shed. I have had to return the gable ends, whoever cut these ends on the machine was asleep on the job. One side was 2090 instead of 2100 and the other side was 2110 instead of 2100. Apart from the longer and shorter ends, the in between sheets on the ends where also much longer. Completed assembling the roof, I have preferred to use silicon in addition to the screws, NO Way am I going to place screws in the roof section like described on the plans. Many of my sheets are torn at the corners and bent. Lets see how this shed turns out.

[TheSuperpilly]

Great video. I bought a 4.5x2.25 easyshed. I read the instructions and it's been sitting in the box for about a month now as I've not been looking forward to building it.

[miajane]

Exactly! 250 screws in my shed. Unbelievably time consuming and somewhat dodgy with some instructions and fit.

[rickyseddon]

Love how the chickens and dog got in on it 😂

[silviofontana]

As my sheds are a permanent fixture, I simply used high grade glazing silicon and glued the bottom channel to the concrete, never, ever moves, same with the roof, use silicon to the wall edge. You are correct, too many fkn screws, much better just using silicon.

[Aesir]

Thanks for realistic video of the 500 easy steps. Great info before I buy.

[steveclements]

just finished assembling my 4.5 meter shed panels. one question when you fix the back panel to the first side panel, which overlaps which. side on top or back on top? it's taken me 1 week as I'm 71 and my wife as a valued helper has recently had a shoulder replacement..

[roso]

Well done. Very patient with yr little ones helping!!😁

[boscoe]

Good job mate. I had a similar experience. Took me 2 full days but I had the help of my son. I found the roof the hardest, mainly with squaring it up. I also bought 4 right angled brackets and screwed them into each of the top corners which helped. Funny you had the same issue with the doors that I had. Perfectly fine when assembled on the ground but not as easy to install once it's up. Satisfying once it's up though.

[gav]

They say easysheds but everyone i know who has brought one says they are not easy to put together at all.

[williamlee]

Very nice. Have a had good and hard job. How many bags of cement did you need for concrete floor? How deep was the concrete floor?

[chad]

Been doing the 5x3 shed, it's now, Blown out to three half days )17 hours and now needing a fourth. Biggest problem I find with the assembly is the poor material quality.
I'm piloting all the holes because the steel gauge is so thin it bends away, no matter how gently I press on it. The metal often tears when I pull out the drill bit. The roof has been a nightmare, The half roof panels droop about every 600mm, making it impossible to slide into it's slot. will finish this comment when I finish the