Two Way Slab Reinforcement

Welcome To AK Skills And Solutions Channel.
Hello,In this video I will show you ,how to provide Main Bars,Distribution Bars,Cranked Bars,Top Extra Bars in Two way slab.
TWO WAY SLAB:
What is two way slab?
1.First of all by looking it is a Square Shape.
2. It is supported by beams or brick walls on all the four sides.
3. The loads are carried by the supports along both directions, it is known as two way slab.
4. In two way slab, the ratio of longer span (l) to shorter span (b) is less than 2.
i.e Longer span (l)/Shorter span (b) less than 2

This types of slabs are mostly used in the floor of multi-storey buildings.

MAIN BARS:- These bars are CRANKED BARS. Main bars are cranked at an angle of 45 Degree with the length of 0.42D

Where, D = Depth of Slab- Top cover – Bottom cover
D=150-20-20
D=110mm

EXTRA BARS:- The extra bar is provided along Cranked bars:

The length of Extra bar is L/4.
#one way slab
#One Way Slab Reinforcement arrangement
#One Way Slab Animation
#animation
#Animation Videos
#animationvideo
#animations
If you see this video helful, Please "Subscribe", like, comment and share. Thanks you.

[madumamaduma]

Easy to understand for beginners. Thank you.

[arjundas]

Your presentation is comparable with Charlie Chaplin, a speechless presentation...wow awesome... few people like the silence.

[nirmalrajpandiyan]

Excellent Work ... Easy to understand...Thank you very much

[Motivation-mnzs]

Bahot hi badhiya banaye hamne bhi aiese hi kiya too way...❤

[AkterAli-gr]

কোব সুন্দর দারুণ বিডিওটা ভাই ভালো লাগলো😮😮😮😮

[dr.laxmishankerkushwaha]

Very good presentation on two- way-slab.

[adhishchaudhary]

Very satisfying 3D representation ... But if I am not wrong- Distribution top bar spacing written(150 mm c/c) is shown at 300mm of spacing.
Also one little confusion if someone could help:- Top distribution bar(TDB blue), in short direction(along with red bars) here is laid at same level with primary cranked red bars but Top DB along the longer span (bars in yellow) is laid well below the level of cranked yellow longer direction bars which seems to decrease the spacing inside the bar mesh in longer span cross section.
So, in short My question is wouldn't it be better to provide blue top distribution bar(along longer span yellow bar direction's which is bottom of top mesh) at the same level of cranked yellow bars to increase the bar spacing in longer direction cross section???

[PMKAA]

Super sir, wonderful animation, I hope every video will be like this thank you

[bipinsoubam]

slab reinforcement bars not connected to beam reinforcement bars, is that allowable or what?

[pankajahirrao]

Jay shree Ram sir excellent work Dhanyawad

[channel-hdsn]

Thank you so much, sir. This video solves some problem.

[titaB..]

Hi! Are the extra top bars for both one way and two way slab always necessary? What if in the schedule of slab reinforcement, there’s no extra bars indicated? Only the top & bottom bars along short & long direction. Thank you.

[geletawekgari]

its very interesting 3D shows but i have one question 👉 is it correct that the casting of the beam is lonely ?? i think this show make us to cast the slab after beam filled concrete is there anything i haven't seen

[chennareddyindla]

Total 4 types of bars . Main bars, distribution bars, support bars, extra bars.

[mamataranabhat]

Which software do we need to use to make such kind of animated video sir?

[DDStudia]

What is the big and little quares sizes? 150mm and 7.5mm ?

[ShamsudeenAdeshola]

No concrete cover at the top of the slab reinforcement?

[copra]

Thank you so much it is important video

[saitejaakula]

Really appreciate your work. Hatsoff to your Dedication in making this❤🙏

[CivilEngineerPrashantSingh]

Sir kis software se apne banaya hai bataiye sir