TP-Link CPE Point to Point Installation and Configuration Tutorial Video

In this video, we show you how to set up and configure your CPE.

THIS VIDEO APPLIES TO THESE MODELS:
• CPE210
• CPE510


FIND US AND FOLLOW US:

[HrothlorienGaming]

OMFG You are not only a life saver but also the only one who even started with changing last prefix to 10 and not 254 like the actual instructions saver man

[JohnnyWoodard]

I bought the CPE210 and set up was identical to this. I've been really pleased with the performance. I now have a network extended across a giant field from one house to the other.

[wilfridaj]

I Installed these for a remote gate without network connectivity. Possibly the easiest hassle-free device. Had network connection as soon as I connected them. Best to setup before taking it to the install site.

[marijndegen]

Just configured two CPE510 's, posting this comment from my backyard, it all seems to work fine. I'm going to make a connection between my home and my storage area. The other people who are in the storage area can also use the internet, maybe make ask some money a month for the service.. Have a nice day ya'll.

[aimk]

Awesome hardware and easy to set up. I used for AP (access point) and provides full performance (80+ Mbps) over my back yard

[teungroenendijk]

Thanks for the video, considering buying these or the CPE210.First question, What UTP cable do I need to extend distance between the poe output of the power adapter and the poe lan0 on the accespoint(Extend to 20 meter)?Second question, What I am missing is the setup between the access point and the modem/router of the internet provider, because I think the access point needz to be in the same IPrange as the IPadress of the router, otherwise the client won't get access to the internet or am I wrong?Thanks for answering. One more question is the software of the CPE510 the same as the type CPE210?

[christianhimmler]

For everyone who is intressted in this, use a secure connection between AC and Client and not creating a open wifi, as shown.

[kingarthur]

Hi, I have a question regarding my setup. Now I own 2 CPE510. I have tried them but the signal is not strong enough to go through trees at a distance of 1.2 km. Now I am thinking of buying another CPE510 and use it as repeater to bypass the trees. My question is.
Is the repeater mode in therms of transmission power and not bandwidth as good as a AP?

Thank you in advance.

[adrianTNT]

At 4:16 where it says "security: none" you need to select wpa 2 or wpa 3, because wep and wpa have almost no security, other people can connect but also see your traffic.
Wifi networks are scanned in bulk very often, don't assume nobody will reach your network :)

[umeshmalik]

I have ordered the same model today, hope I will configure by steps you shared. Thanks for the video. At my site Distance between 2 devices is not more than 200 Mtr. Installing TP Link to Avoid Fibre cable.

[fotisnafpliog]

How can i set 1 cpe210 as wireless adaptor for hiring internet connection from my neighbour that has not another cpe?
Which settings i have to choose?

[gyorgyvajda]

How much is the average transfer speed between the two devices if the distance is 2 km over urban area but clear sight between antennas? I see it is 300 Mbps, and the ethernet on it is 100 Mbps. But in a typical scenario, what speed that I can expect in these conditions? Thanks!

[gagarinone]

Please be aware regarding the (DFS) Dynamic Frequency Selection on 5 GHz. DFS is prioritizing military radar, satellite communication, and weather radar.

That means that your link will disconnect between 1-10 minutes if it will find a military radar, satellite communication, and weather radar use in you neighboorhood.

The sellers of 5 GHz links, as TP-Link, are talking quietly about this. I had to learn it the hard way.

[eddiemcdiarmid]

After some advice. I have a pair of EAP110 outdoor access points. Can I make a point to point bridge between them?

[jaybeebartolome]

Is this work when there's a building blocking between cpe?

[chuckb]

Hi, I have a TP-Link to exclusively communicate with a clients driveway automatic gate. Every 6 weeks I have to go back and open up the gate controller to re-enter the TP-link password, like it has an auto-log off security feature. Real hassle. Is there a configuration to stay logged on/in indefinitely? Thanks

[henrikwalfridsson]

I bought a CPE510 yesterday. I am only gonna use one of these so I can send WiFi to my neighbor. Wich of the modes am I going to choose?

[kgibson]

Does the AP have to stay connected to a computer or can it operate wirelessly after the setup of it and the client?

[RonanGyn]

Hello! I want to distribute my Wi-Fi 120mb down and 10mb up using only one device at home and the friend who lives 300 meters getting full speed on his smartphone. Which products do I have?

[iwilltryfixyou]

Before I watched this video my CPE was already installed and it was very easy! Thank you TP Link good job! Cheers!