Engine starter + Hydraulic pump = Something COOL

In today's video, we will show you how to make a hydraulic kit that will be used in the video where we will build an electric vehicle to transport various loads. Link above.
In order for the starter to be used as a motor, I had to lock the axle in one place so that it would not slide out.
Then I made a mounting from the sleeve so that the starter could drive the pump.
When both elements were joined together, I started working on the hydraulic oil tank. I used a large square tube and flat bars for this, which saved a lot of work.
The next step was to connect all the hydraulics and conduct a test.
In the video we showed how much force this set has when crushing various things, but in fact, it will be used to lift the loading box in an electric vehicle.

[MadeinPolandChannel]

Hi Guys.
A lot of you write about the continuous work of this set, but I haven't mentioned it anywhere. This will be used in a cycle of 10 seconds on, 5 minutes off, so no worries.

Some of you may ask "why didn't you buy a hydraulic power pack on ebay?"
It is because I wanted to see if it is possible to make such a set and if it will work, and learn more about power hydraulics :)

[Shipfixer]

Instant LIKE and SUBSCRIBE! I'm a welder/fabricator in a shipyard. I have access to tons of old parts in the shop and boneyard that are still serviceable. I was looking for inspiration and ideas when I found your channel. You are skilled and your work says a lot about your ingenuity and vision. Kind thanks for sharing. Greetings from Alaska.

[carlosanzuelo]

Great video!!!! Straight to the obnoxious music. Perfect.

[st.charlesstreet]

Absolutely Amazing! Looks like you can make even the Space Shuttle in that shop of yours. 😮

[bradcavanagh]

I bought a second-hand 4 tonne excavator for my farm last month and have been learning how hydraulics work as well so I can service it myself, which is why I instantly knew what you were doing with the oil reservoir! It's absolutely incredible to me the amount of power such small pumps and motors can produce.

[miker]

"something cool" is an understatement! This is kick-ass!

[DuncanAitken]

Upcoming electric vehicle build by you guys? HELL YEAH! Can't wait! I'm designing and building a battery electric tractor, you guys have been a great inspiration.

[ryanmalin]

Great job! Ive seen starter motor used for an electric scooter. It had so much torque it was almost unmanageable of the line.

[TimCoulter]

Very nice project and beautifully constructed. It would be good if the motor start/stop could be incorporated into the activation of the hydraulics.

[joegilly]

That home made pump works very well. Good job. Time to make a log splitter for your ram assembly.👍

[horstszibulski]

Loved the inside tank filter, nothing sticks out and could break off, nice idea!
:-D

[im]

I agree with what others have said about having a switch activate the pump when the lever is moved, would simplify things a bit.

Also, you should incorporate a pressure relief valve. This will prevent stalling of the pump and motor when situations arise that could do so, such as when the ram hits end of travel, or load is too high for the system.

[Pterodactyl-knve]

Wow! Your level of skills, design, logic, creativity and applied functionality is mind blowing.

[mateuszsiwik]

Świetne to :D Choć jak zobaczyłem montaż filtra oleju to myślałem, że robisz pompę chłodziwa do jakiejś maszyny cnc...

[richardpowell]

You have the. Best DYI. Projects. On U tube. I built the vise. Project everybody see it wants one. Next time ill pay for water jet cut. Oxacleden. I had too much clean up. But works great thankyou

[alexilyin]

Как всегда отличное исполнение и грамотные решения. У автора и с головой и с руками полный порядок. Ничего, кроме уважения.

[RemontidEalny]

Właśnie mi przypomniałeś że mam 2 pompy zdobyczne po demontażu ramp załadunkowych ;) coś w końcu trzeba będzie z tego wyczarować.
Fajna robota. Bardzo lubie Twoje filmy.

[cfwhstc]

Люблю такие видео и радуюсь за человека, у которого много разного хорошего инструмента.

[seanflanagan]

@01:08 Wow, never thought of disassembling a starter drive that way, what a neat trick! 😍

[robertmanley]

Great job man !! I smell a cool project coming from this I want to see the electric truck this will go on can't leave me hanging ! Wait he already I will eagerly await part 2 !! 👍👍