The full NTRIP Setup Guide for DJI RTK Drones

preview_player
Показать описание
Do you need the DJI RTK Mobile Base Station?

Paul takes you through a comprehensive guide to connecting the NTRIP network with the DJI Mavic 3 Enterprise (RTK module needed), Mavic 3 Multispectral, Mavic 3T, Mavic 3E, as well as the M30T, M300, and M350 models. If you are an aspiring drone professional, this tutorial will help you achieve high survey accuracy without needing a DJI DRTK base station.

Skip to the chapters below:
0:00 Intro
1:23 What is RTK?
2:29 What is NTRIP?
3:13 Finding a Service
4:22 How to Connect to NTRIP!
7:18 Need to Know

How to Connect to NTRIP:

In your drone's settings, activate RTK positioning and switch the RTK Service Type to 'Custom RTK Network'.

Then enter the NTRIP details: Configuration (for quick switching between Mount Points), NTRIP Address, port (usually 2101), your registered email and password, and the CASE SENSITIVE Mount Point name.

Save these settings, and within a few seconds, your drone will be connected, providing a more stable and accurate flight!
---

Happy flying legends! #drones #DRTK #NTRIP
-------------------------------------------------------
-------------------------------------------------------
UAVISUALS™ (Unmanned Aerial Visual Solutions) is fast becoming Australia’s preferred drone & technology solutions company.
-------------------------------------------------------
*********
Рекомендации по теме
Комментарии
Автор

Our company is becoming more commercial-focused and want to step up our accuracy game with RTK, scouring YouTube this video was THE MOST helpful!! Thank you so much for sharing your knowledge!

flyinHI
Автор

Great information. Thank you, you are doing great work in building the capasity in the industry. Live long and prosper...

matthewhayden
Автор

Great video once again guys. Great cost saving for small operators

benm
Автор

*yeets base station* 😂 Awesome cost saving advice guys!

MoleMedia
Автор

Absolute legends! was legit about purchase at RTK station for my Inspire, not anymore!

onetwoshootmedia
Автор

Very valuable, thank you so much for sharing!

DoryAbelman
Автор

Thanks mate! I just got the Matrice 4E and I'm trying not to need the base station, so hopefully this will work over here in the states.

Rusty_shackleford
Автор

Nice video. You mentioned that the deployment location should be within ~15 km to a CORS base station. My understanding is NTRIP system uses a network approach to establish a VRS (virtual reference station) near the user through interpolation. This means as long as you have internet access and there are a few CORS stations around you, NTRIP should be able to calculate the correction message and send it to you by internet. Is my understanding correct? I am located in North Carolina, US.

Bai_DigitalAG
Автор

Do you have to manually insert mountpoint? With GNSS receivers after you put in NTRIP ip and port you are able to download the MOUNTpoint table and select the one from the list. Thats not the case with DJ Pilot2 ?

mrtsoo
Автор

RTK is free in Australia? Its subscription based in Singapore....

FuzzyAason
Автор

yes you are right, it might be a cheaper option but where i am located we have only 1 CORS network for the coverage of the island. and the subscription fee is consequential. since we already have base stations and rovers (from FOIF) i wanted to know if it is possible to connect the RTK to a base station and how pls. thank you

ygtv
Автор

Will NTRIP work in remote areas in Africa?

chykeebizie
Автор

can we use a south galaxy 1 as a base station to coonect with dji phantom 4 rtk?

teukurisqul
Автор

Even with NTRIP distance from mount point is an issue if you want to keep a good accuracy 😉

fabricer.
Автор

Any way of using a gnss from say leica?

vatoalex
Автор

In usa it looks like NAOO CORS is no longer available to general public. Only past data meaning flying the drone isn't accurate but need software to later input to correct which is sad😢

DuffDrones
Автор

@1:44 While you are getting the general concept of RTK correct, you are not describing the controller interface correctly. The custom network RTK is the location of the base station from your NTRIP connection, not the corrected location of the drone.

bonnieludka
Автор

For countries like Nigeria in Africa here, its quite a challenge seeing Rtk server close 😢

squareflicks
visit shbcf.ru