Easy Fix for #NABU Fan

I found an easy fix for NABU's fan grinding/seizing issue with no sanding or bending

[PeterKoster]

Thank you. I did the same thing and worked like a charm. I added one thing was to put 3 very small (< 1mm) square pieces of black tape between the fan and housing, one right next to each screw hole, to provide a bit of grip so the fan motor/body would not slip down when reinstalled. When I first adjusted the fan it worked, no contact between blades and housing when horizontal, but when I turned it vertical to re-install it started making contact again. I was a little hesitant to crank down on the screws too much as the metal is quite soft. Cheers and thanks for the tip.