How to Start Using Photon Workshop? (Beginner Guide 1)

This video will show you how to use the Anycubic Photon workshop. We'll walk you through the process of using, setting, adding support, and teach some useful tips. And a part of how to add support to get a more perfect model will be shown in the next video, it will be uploaded soon! 😊

And if you have any doubts about the video or if you have anything you would like to know, please comment below! 😁

===

🛒Buy Printer

🔍 Support channel (Product installation and maintenance)

👨 Social Page

🔍 Group
Anycubic Official User Group

👷‍♂️ After-Sale Service

#anycubic #photonworkshop #3dprint

[shashankshekhar_]

Share the download link for the software please

[doomstadt]

But why don't I have these options in the side panel like in the video? I can only get to them when I specifically go to set the printer I'm using, then they vanish...I enabled everything in the "View" menu but none of those brought it back.

[shannonm]

Great video, please add instructions on how to use the Split function to print a model that is too large for build plate area, how do you keep the other half of the model after you cut group is what i cant figure out.

[alicedowntherabbithole]

I have a new Photon Mono, but the workshop program downloaded from the memory stick provided only has 3 options for machine types "Photon S, Photon, Photon Zero". In this video "Photon Mono" is listed. Which do I choose? Thanks Which do I choose? Thanks

[MeneerGaming]

just got my printer today very excited

[TheCollectorEdd]

How to set layer exposure manually for each layer? I want to ensure that the transition between the 40 second bottom layers and standard layers of 2 seconds goes gradually. But after editing the layer exposure manually it doesn't save the settings, but resets to general settings. Please help.

[bostonkoberlein]

is there a way to create your own models?

[KerleyExpress]

how do you remove the model from the slicer when you done slicing it

[WCollinsWhiteIII]

Photon Mono X 6K under settings - Slice Parameters - Advance Control. What's the difference in the parameters numbered [0] and [1] Each layer control (bottom and Normal seem to have 2 sets of parameters. What's the default. Do I need to have all 4 parameters set?

[killsmusic]

I save a slice file on the hard drive but when i go to print it doesn’t appear on the printer

[Gearz-]

Hello. So if Photon Workshop is used to prepare the model, what softwares can we use to make actual models from scratch? Like Blender, Inventor, or any other ones?

[seyedmahdimirmohamadi]

hello there. i have a material which i want a different exposure time for each layer. for example the first 10 layers should have an exposure time of 2s and the next 10 layers must have an exposure time of 1s.

how can i achieve this goal? please guide me because i could not find any guides on how to do it on your website

[davidgillis]

For some reason the program will not let me choose the Photon printer in the configure menue. It will only allow the Photon S.

[alanq]

I run my computer through my tv. Whenever I open the workshop, I can't see the top bar. How can I reduce the screen size? I have to use the task manager to close the workshop.

[Ricky]

How do I change stl to pwo? I'm trying to print but it won't show up on the printer

[mariosgalanis]

Hello I have buy the photon zero and I have stl files I fix it with your program but they dont save it to me in pw0 file and the printer didn't read it. How I can change this ?

[norbertofernandez]

HELP!! got my photon mono x week ago, been struggling with it. The test file work perfect but i download files from online stl and use the photon workshop to slice it and convert it to pwmx. I load it to the flash drive, flash drive displays correct print i wan to print. hit print, begins to print..hours later should 50, 60, 70% etc but i look at the plate and it has built nothing. I am using the any cubic resin. please help?? what am i doing wrong.

[miguelangelramirezbarcenas]

hola, tengo una photon mono 4 k donde descargo el programa?

[정승호-hv]

Today I bought Anycubic 3D printer. But there is no anycubic software ... How can I get this soft ware?

[elmarcianodenny]

My printer insists on adding supports instead of printing direct to the base platform, even though the part is flat. Any idea what parameter removes the supports on the base platform? Thanks.