How To Cut Crown Molding For Beginners - Inside Corners

Here is a new video for OUTSIDE CORNERS!

Thanks for the support everyone!

I hope you guys enjoy this quick video on crown molding for beginners. This trick usually only works for perfectly straight corners. You will have to get more advanced when doing crown in an old home and coping the crown will have to be done. How to cut crown molding isn't rocket science, you just need to practice over time. I do it very little! I'm not an expert in the slightest!

On the hunt for a new miter saw? Here are my recommendations!

Bosch 12" Dual-Bevel Sliding Miter Saw - Corded
Ridgid 12" Dual-Bevel Sliding Miter Saw - Corded
DeWalt 10" Single-Bevel Compound Miter Saw - Corded
Milwaukee 10" Dual-Bevel Sliding Miter Saw - M18

How to cut crown molding-inside corners!

Please consider joining our community on Facebook. Group - TheDurbinCompound

Some of my Favorite Stuff! I have done reviews on a lot of these items! I may receive commission on some items.

Best Garage Lights! The best I’ve found!
15% DISCOUNT CODE: 151PMNBX

Check Out Some Of My Tool Reviews!
Milwaukee Rolling Toolbox 48-22-8426
Milwaukee Large Toolbox 48-22-8425
Milwaukee Toolbox 48-22-8424
Milwaukee Slim 11 Compartment Organizer 48-22-8431
Milwaukee Slim 5 Compartment Organizer 48-22-8436
Milwaukee M12 Compact Inflator 2475-20
Milwaukee M18 Oscillating Multitool 2626-20
Milwaukee Switchtank Backpack Sprayer

Check Out My Work Pants Series!
Dickies Flex Work Pants (Best price is on Amazon)
Blaklader X1600 Pants

Check Out My Work Boot Series!
Rock Rooster Wedge Sole Work Boots
Timberland Pro Gridworks 8” Boot
Timberland Pro Boondocks 6” Boot
Thorogood Moc Toe 8” Boots 814-3800

Electrician Gear / Test Equipment!
Fluke 1AC Non-Contact Voltage Tester
Fluke T6-1000 Field Sense Meter
Fluke Ammeter and Multimeter Kit
Feildpiece Manometer SDNM-5
Fluke 62 Max Infrared Thermometer

My Favorite Flashlights!
Streamlight Stylus Pro Pocket Light 100 Lumens
Surefire Stilletto Pocket Flashlight
Surefire Tactician Pocket Flashlight

Thanks for watching! Stay tuned for more!

[oscarfig]

I watched several video where they just kept saying it was easy, but I left the video more confused than when I started. This was by FAR the most informative

[marro]

Of all the videos on youtube, yours is the only one that truly described and showed in detail how inside cuts were done. Thank you, Thank you!

[wickedmosher]

The idea to mark the tape on the saw is terrific. Thank you for sharing.

[Cookefan]

I don’t know whether it’s because I’ve already watched a few dozen videos on this or whether it’s just that this guy finally made it make sense but now I GET IT. I now understand the inversion principle PLUS I now understand which side needs to be longest given an inside or outside corner.
THANK YOU, THANK YOU, THANK YOU! 🙏🏽

[eroom]

Best on the internet for explaining how to cut this molding and measuring

[Dostis]

Long side bottom for inside corners and long side top for outside corners is such a simple yet awesome explanation. Thanks !

[badsteed]

This right here! I also spent hours, tilted blade even and nada but heartache! Thank you so much for this simple and effective method

[darrellblair]

I am installing crown moulding right now and got so confused. Looked on You Tube and immediately found you channel. Thank you, thank you, thank you. You just got a new subscriber. 👍👍👍

[rcaction]

Turn the crown upside down is golden advice! Sets the pitch automatically when sitting on the top base of crown. Thanks for the accurate measurement tip too.

[filibertonunez]

I just wanted to thank you for the great tutorial video! It’s excellent the way you explain it is easy to understand. I completed my project…God blessed you and plz keep posting more⭐️ ⭐️ ⭐️ ⭐️ ⭐️

[dewaynebraley]

I could tell you was a quality trim Carpenter when you mentioned how wide of a mark The Carpenter's pencil makes that's good work buddy keep it up and I like your work

[andym]

After going through a few videos, yours was the only one that does not require a jig and easy to understand. Thank you so much!

[mdub]

Also remember!!! Never cut directly on the line! The saw blade is 1/8 thick, and if you cut directly on the line then it will shorten your piece by 1/16 if not the 1/8... blade needs to be on the outside of your line if that makes sense! See and have made tons of errors shorting pieces that way and it’s extremely frustrating

[feethighermaga]

Thank you, just finished my room and it cane out perfect, couldnt figure out how to cut 90, but after i put the top of the crown molding at the bottom(table) of the miter cuts went perfect!

[mindlessmeatball]

Thank you for this! I’ve had a hard time visualizing how the inside corners of the crown molding would go together. You’ve made this process 100% easier!

[karenhenderson]

Excellent video and instructions. You solved my problem of how to cut a corner for crown molding. Memory had failed me and I needed a reminder. Thank you so much for simple instructions.

[daleney]

well done marine, struggled with molding cuts, you made it clear & simple, love the accurate measuring tip as well . AIRBORNE !

[randydicotti]

YOU, Sir are a genius and teaching guru. I watched other videos and was still lost. 5 minutes after watching your superb video I was installing crown molding like a pro!
Can't thank you enough. Subscribed !

[michaelreid]

The absolute best video I've seen on cutting crow molding. Thank you!

[SuperDavidBrothers]

When I was in high school, I took both a construction class and a woodworking class and man was it a lot of fun for sure!! We didn't make crown molding cuts but we did make miter cuts, rip cuts, cross cuts, etc. In construction we also learned about how to make a bird's mouth cut where I think it's cut at a 45° angle or something and we also learned how to build a shed as well. In woodworking we also learned not only just how to make accurate measurements and glue them up, but we also learned how to make fun projects like I made a coffee table, flag, Chinese Checkerboard, and a big clip as well! Man was it such a huge blast and I really hope to do more of that stuff in the future now that you showed us this video man thanks so so much for this!