✨ LG DRYER - EASY RESET BUTTON - Make Sure To Unplug ✨ #diy #appliancerepair #short #shorts #fix

✨ LG DRYER - EASY RESET BUTTON

✨ LG DRYER That Won’t HEAT - EASY FIX ✨
Quick & Easy Reset Button to get Your LG GAS DRYER Heating again in under 1 Minute.
* MAKE SURE YOU UNPLUG YOUR DRYER FIRST!
* Pop off the round plastic cover at the right side lower back corner of your right dryer panel using a flat screwdriver.
* Reach in with your right hand toward the front of the dryer burner tube and find the black RESET Button. Press the button. You should feel a click.
* Replace the round plastic cover and start your dryer.
* MAKE SURE YOU CLEAN OUT YOUR DRYER VENT TUBE SO THE RESET BUTTON WON’T TRIP AGAIN.

✨ #diy #appliancerepair #short #shorts #fix #repair

✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨

UCbQy5UxlvaPPsDHvfvW76JQ?sub_confirmation=1

-If My Advice Has Helped You…

- Get Great Deals on Appliance Parts with Quick Delivery from Amazon.

Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊Easy #diy #appliancerepair #short #shorts #fix #repair *
*
***

[faithunicorn]

Thank you the reset button worked for me!!!

[LauraK-uc]

Thank you, thank you so much!! You fixed my dryer!

[rowdyrager-]

I'm not sure what year our LH Sensor dry is. But the cap didn't pry off. I had to knocked it out gently with a hammer and chisel. It has like 6 small weld tabs holding the circular plate in place.

But once that was off. I did see the switch describe. It was a light press I didn't hear a click but it made the dryer work.

Cheers


Clean out all the lint well!

[whynot]

Mine is electric and dont see the button. Im wondering if this may only be on gas dryers. I saw another vid with the button but it was gas.

[nancyrafael]

Might be a dumb question, but does the dryer need to be unplugged or plugged in to reset?

[ethanspielvogel]

You saved my butt. Mine looked slightly different, but access was the same and it worked just like you Thanks!

[tomf]

My sensor keeps tripping - I think it needs to be replaced. Vents are clear of lint. What if I taped button down? Would that stop from tripping?

[amandabeenencantor]

My (brand new) LG propane dryer was working fine and now stopped igniting. There’s a metal plate instead of a plastic one and it seems to be sort of fused onto the casing of the dryer, … do I take it off?

[davislittle]

My question is what causes the dryer to stop heating and what does the reset do? This happens to me once a month. I’m able to press the button, but it’s a 15-20 minute task and it’s getting annoying.

[tyesongs]

My drum won’t spin. Will a reset correct that issue

[hudaf]

Can someone tell me where is the plastic round piece to remove? Is it the front, back or the side of the dryer?

[sharonmunoz]

My dryer was making a noise but not turning so I unplugged it and the plugged it in again and it worked!!

[valeriemckeever]

Thanks so much! This video helped me out 2x!!

[Peter-yu]

Is it in the front of the machine or the back of the machine

[jackburns]

Poor engineering! Damn hole was designed for a child’s arm.

[KCsoccerjersey]

The black knob in between the two wires in my dryer is a little loose when I tried to press on it. Is that normal?

[mary-xjup]

I have a question I did exactly what you suggested and it worked but the next load I wanted to dry it did the same thing as before meaning it just spins but no heat is there a reason as to why I have to keep resetting it? Could there be something else wrong with it? Please help
Thank you! 😢

[letitride]

On my lg dryer I have all these different dryer setting. The one I like to use is the normal setting and that want won’t heat, any answers thankyou

[disbegroe]

Reset button isn't there. It's not on the left side either.

[TheMomSHAR]

Mine doesnt have a button between the connectors.... 😢