Deltashield - Samsung Galaxy Watch Active 40mm Screen Protector Installation Video

"Deltashield screen protector installation video.
*Written Instructions Below*

Screen Protector

Installation Instructions:

1. Turn off your device and remove battery if possible.

2. Wash hands and prepare a clean work area.

3. Spray solution onto microfiber cloth and clean device surface.

4. Spray solution onto fingers to minimize fingerprints when handling protector.

5. Apply solution onto top side of protector to ease squeegee process.

6. Carefully peel protector from liner. Spray an even coating of solution onto adhesive side of protector.

7. Lay protector adhesive-side down onto device surface. Align protector cutouts and edges to match your device.

8. Hold protector in place and use installation squeegee to remove excess solution underneath protector. Avoid pushing solution into sensitive openings such as speaker holes, buttons, and headphone jacks.

9. Protector may move during squeegee process. If so, stop and realign protector before continuing squeegee process. Protector may require multiple readjustments. Adjustments will be more difficult to make as more solution is removed.

10. For curved surfaces, allow the protector a few minutes to dry before tacking the solution down with your fingers. If the protector does not immediately stick, wait a few minutes before trying again.

11. Once the installation is complete, allow the device a period of 12-24 hours to dry before turning on and using your device. Tiny bubbles and other imperfections should disappear completely in 2-3 days."

[el_blaxicano]

out of all screen protectors that I put on, I enjoy the wet apply more than dry, it's just the satisfaction of after the protector dries it looks so clean and perfect, no imperfections