Watch this before cleaning oxygen sensor/Best way to clean o2 sensors/anti seize on oxygen sensor

In todays video i will show you Best way to clean o2 sensors
if you willing to clean your cars oxygen sensor: Watch this before cleaning oxygen sensor, and also i will be answering some of your questions: should we use anti seize on oxygen sensor? can we clean oxygen sensor with ultrasonic cleaner
so i will cover all that in this video

🔔 Hit the bell next to Subscribe so you don't miss a video!

Follow my Instagrams so we can be best friends
-------------------------------------------

Like my facebook page:
-------------------------------------------

**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos

Gears I Use:

For contact
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[mrvic]

I'm running lean just after Flushing all the fuel lines and replacing the fuel injectors because of getting bad gas from a gas station that had water in the tanks, now it's time to clean the O2 sensors thanks for the video

[whlawson]

Any changes in voltage, for O2 sensor output reading, taken by a OBD2 after installing this clean up 02 sensor?. Good if you could compare OBD2 reading for old O2 sensor before & after cleaning vs a new O2 sensor reading vs mass air flow readings in g/second for all these 3 situations. 🤔🤔🤔. Regards.

[Sroor]

It seem there is no difference between before and after

[tominmo]

Very good tip about sensor-safe anti seize. I did not know about that.

[crabapple]

I can't imagine that a quick spray of carb cleaner could help much. I soaked mine in fuel/fuel injector cleaner for a day or more and then blew through the little holes to try to clean the inner surface. if I had an ultrasonic cleaning machine, i would have used that instead of just blowingit out after the soak.

[MrBigR]

Mine have over 100, 000 miles on them! I'll grab a fresh set GM Genuines $80.00 off Rock Auto & be done with it👍🏿

[xmachine]

Good video. Thank you for making it.
The ultra sonic removed even more carbon.

[crabapple]

if I was to use an ultrasonic cleaner thing, i would wire brush the crud off the outside first and probably blow off all loose stuff. Then I would use the ultrasonic. That way I would have a better idea of what was being cleaned from behind that outer covering. I don't need to be misled by the insignificant crud falling off of the 'outside'.

[Hpiv]

Well ❤️‍🩹 explained cleaning 🧹🧼 process 😃

[omayaali]

hello
can i clean in this method th A/F ratio sensor which is more sensitive from oxygen sensor in modern cars?

[souvikprofile]

WD40 well enough to clean the sensor? as I don't have a ultrasonic cleaner... is thr any risk of applying curb cleaner?

[souvikprofile]

what did u applied at last? that Ash colour chemicle??

[НурикКары]

Guapo español! Sigue así 👍 Kazajstán ✊

[TonyMontana-xffr]

I know replacing is the best cleaning process

[edwardanthony]

Used brush & didn't know about carb cleaner.

[stevenmwewa]

How do tell that oxygen sensor as a problem?

[Number_]

I use electrical contact cleaner instead of carb cleaner. Get it in those holes and shake it. Can also dip it.

[omaromar]

Please help, i clean it like you mentioned but after i turn the car smoke start come from the oxygen sensor like burn something and i turn off the car, is that normal? Thank you

[МихаилПотапыч-их]

Hello!
Please tell me, an iron brush and a carb cleaner, is this the norm for this sensor! ??
No precious metal coating on it can be damaged?
Or is there no such thing!?
Thank you in advance for your reply!..

[tiger]

The tricks on getting the o2 sensor out are great. If I go to all the trouble and am able to remove the old sensor, I'll just buy a new o2 sensor to replace the old one rather than try to clean it.