DIY Desk Lamp / Edison Light Bulb / Video how to & Ideas

I build this decorative lamp from wood and Vintage Glass Edison 40 Watt I really like how this Lamp look and it was pretty easy build but you will need some power tools to build it .
Don't forget to subscribe!!

Shopping :

Tool:

(Affiliate links)

Go check also other Video :

Don't forget to SUBSCRIBE!!

#woodworking
#DIY Lamp
#Desk Light

[inrock]

To solve the problem of replacing the lamp (and it will burn out, trust me), instead of gluing the top piece on to the posts, drill a couple of holes and screw it down with some brass screws. This would also add a nice accent. To prolong lamp life, you can also use a dimmer. Lutron makes one that you plug your lamp cord into and then plug the dimmer into the receptacle. The other end has a slider switch and if you run it all the way up and then back it down a tad, you're not delivering full voltage to the lamp and it will last a long, long time. You can also move the slider end about 6ft away from the lamp which is convenient. One model is TT-300NLH-WH that has a locator light. I believe they also make models for compact fluorescent lamps. This also makes for a very nice accent light when you're watching TV or in the bedroom. I have a few of them and I haven't replaced the lamps/bulbs in about 7 years. Dimmer pays for itself. They're between $10-15. Remember, manufacturers don't want lamps/bulbs to last forever. They want you to keep buying them.

[alexandre]

looks amazing, but how the hell do you change the lightbulb if it burns out ?

[asimraza]

Amazing design. Cut to perfection. Great finishing.

[randommemesonly]

Best lamp ever bro i have never seen like this, keep it bro 👍
💕from🇮🇳

[keno]

Using a miter and a fence at the same time and not using a riving knife can all lead to a dangerous kick back. You should use a stop block on the miter instead or clamp a stop block to the fence that ends before the stock comes in contact with the blade.

[Dadylongarms]

Very very nice. My only question is how are you planning on changing the bulb in the future?

[ranjanroy]

Efforts are made to look cool. However, it is useless practically. No option to replace the bulb.

[OMDAYATTV]

Mantap bosku Slam dri form Indonesian 🇲🇨🇲🇨🇲🇨 channel.. 🙏🙏🙏

[santiagoXIX]

Nice lamp. Suggestion: use a more stylish cable for the lamp.

[dgoins]

Great design! And I love that you used regular tools!

[carolpowley]

How thick are the dado cuts you made on the sticks? And how big is the hole you cut in each block and the base? Great video!!

[reneaguilar]

Great design but how to replace the bulb in case you have to

[bakerboys]

I noticed you added a second blade (2:50) and I was just wondering what does that blade do?

[pugachev]

Если время девать некуда, то можно и так - от скуки помогает.

[PapaSeBakkie]

Maybe I missed it but what happens when you need to change the bulb?

[chrisloya]

Looks like a fire hazard imo, leds would be my option, and in no way able to change the bulb. Perhaps line the holes with something heat resistant.

Overall, nice design

[TuanBui-ypoz]

So lite bulb stuck in there ?? What happens when it burns out ?

[Renog]

Greetings, could you tell me what wood you use, and congratulations, very beautiful lamp

[bauerkurt]

Security: You are using the transverse and longitudinal fences on the table saw at the same time. You should never do that. And on your table saw I miss the splitting wedge.😥😥

[florenthuck]

JOLIE ? MAIS ON FAIT COMMENT POUR CHANGER L'AMPOULE ?