IQ Shield - Samsung Galaxy S10 Plus (S10+) Screen Protector Installation Video

**Written Instructions Below**

1. Be sure that you have all the necessary materials needed. Each IQ shield "Spray Install" kit will include an installation bottle, squeegee, lint-free cloth and screen protector for your device.

2. Find a flat, clean and well-lit work environment before you start installing the IQ shield. This is to make sure that you avoid dust, lint, small hair follicles or other micro-debris from getting under the film during the installation process.

3. Turn off your device. If possible, also remove the battery.

4. Wipe your device's screen with the lint-free cloth and remove all visible dust and fingerprints.

5. Wash your hands thoroughly to make sure no dirt or oil get on the screen protector or screen.

6. Spray your fingertips with the installation solution bottle provided. Moistening your fingers will help prevent any fingerprints from getting on the screen protector or screen during installation.

7. With your wet fingertips, carefully peel the IQ Shield from its backing liner.

8. With one hand, hold the film steady with the adhesive side facing up. With your other hand, begin to spray the screen protector's adhesive side with the installation solution bottle provided.

***Be sure to spray a COMPLETE AND EVEN LAYER on the adhesive side***

9. If the screen protector is dripping wet, gently shake off the excess installation solution.

10. Place the screen protector on your device. You should be able to easily slide the IQ Shield around to make any necessary adjustments. Please take your time until the IQ Shield is completely aligned.

11. Once the film is perfectly positioned, take one hand to hold the film in place. With your other hand, you'll be pushing out all the excess solution from under y our IQ Shield with the squeegee provided.

***AVOID pushing the solution into any holes, speakers, and buttons on your device***

12. When you're done, gently pad away all the leftover solution with the lint-free cloth, and let your device sit for at least 12-24 hours if possible. We suggest installing the IQ Shield at night before heading to bed. By morning, the IQ Shield should be settled onto your screen, and your device should be ready to go.

13. If there are visible micro-bubbles and streaks left under the IQ Shield, simply wait for them to disappear. Your screen should be completely clear in a few days.

[apolk]

I had an IQ Shield screen protector on my Galaxy S7 that I had for 2 years, and another one on my Galaxy S9+ that kept the screen in great condition for 3 whole years! Just bought another one for my new Galaxy S20 FE; thanks for the great products and for this helpful video to remind me how to install it.

[tjwash]

I will never buy anything but this brand for all of my electronics. I love that you can slide them around to get it right, other protectors stick instantly where you put them and if you try to lift them to reposition them you've got a lifetime of bubbles

[insignializzy]

I love these screen protectors. I had one on my old Pixel 2XL for 4 years before it started bubbling a bit. I'd dropped that phone multiple times, but thanks to IQ Shield and an OtterBox Defender case, my screen never cracked. 👍 I'm about to put one on my new phone now.

[cassiemorris]

The edges wouldn't hold down at first but don't panic. Its best to keep pushing it down with the Gray tool. I put the cleaning cloth on top so it didn't create scratches on the screen. After that use your finger tips and push/hold the edges down with fingers. It worked for me, and my fingertips were semi dry when I did that.

[GanDtech]

If you’re terrible with putting on screen protectors in the first place this won’t be easy... hard to keep the thing in place as you’re trying to move the water out. Fingerprint scanner works though (S21)

[jfcpa]

Do you apply the shield with the phone out of its case?

[marilynalvarez]

This is the most COMPLICATED screen protector installation I have ever seen not to mention possibly harmful to the device with all that liquid....what were they thinking?

[miniclip]

I have the same Spigen case as shown in the video but somehow I can't put it on without the edges pushing the screen protector and creating a bubble and a fold :( I love the screen protector but don't like that it can't be used with many cases (only works with half of my cases)

[bricks]

I have an s21 ultra 5g. These are ok. The only issue is it is a bit long on the bottom each time I put one one. Also the edges collect lint.

[KiRaPaRk]

At first the corner wont stick. But it took me quite awhile to let it stick onto it, I keep using my finger to press & scrub on the corner.

[gndeep]

I wasted the first one, I hope 2nd one doesnt dissapoint me as well, not easy to put on

[TheIndependentbeauty]

Does this protect the screen from drops?

[SilentInferno]

Does the stock screen protector/sticker need to be removed first?

[jeffreyp]

Yay! I just installed mine! I hope that it sticks well, but the installation was pretty easy and cool. The sides stuck down after I hed them down a pushed the water out; I just hope they stay like that.

[BA-ozxz]

It was the best of the best screen protector for my S9. However the one that I got for my S10 Plus is kinda too big that doesn't fit into the case and keeps peeling off.

The guys should pay a bit more attention to make it more case friendly :(

[ilenelopez]

had bubbles and the sides wont go down. it has some type of lines.... don't like it and don't recommend

[JordysWheels]

Hi, will the fingerprint sensor work with this screen protector?

[ronsuper]

This "screen protector ", fit better in the trash can.

[ThiagoSantos-pdjy]

Hello, I would like to ask if it would be possible for your cellphone to acquire a fortnite game skin, just have this skin have the cell phone

[adamali]

Does the fingerprint sensor still work?