How to Set PROFINET Communication Between Altivar and Siemens PLC's | Schneider Electric Support

Показать описание

Welcome to our channel! In this tutorial, we'll guide you through the process of establishing PROFINET communication between Altivar Drives and Siemens PLC’s using SoMove and TIA Portal. Whether you're working with Altivar Machine models like ATV320, ATV340, ATV600, ATV900, or handling Siemens PLCs, this step-by-step guide will make the setup seamless.

🔔 Timestamps:
0:04 - Introduction
0:47 - Hardware Setup
1:51 - Project Setup
4:40 - Monitoring the Drive
5:28 - Conclusion

➡️For more information see:

---------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 DISCOVER JOB OPPORTUNITIES
---------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------
👋 GET TO KNOW US BETTER
---------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------
⚡ GET IN TOUCH VIA SOCIAL MEDIA
---------------------------------------------------------------------------------------------------------------------------------------------------------

Рекомендации по теме

Комментарии

very easy to follow and precise guide, I was able to communicate with the VFD with a WinAC RTX soft plc in no time!

mjkl

Hello, why don't you see the Profinet message type selection parameters in the inverter? Is it ok to configure PPO only in the SIEMENS TIA Portal?

bernardshawgeorge

Very Good Video! not that i can start and stop it. What about how to set the direction Rev/Fwd? Fault Reset? Current Warnings/Fault? We just purchased 8 more so any help would be appreciated, Thank you

jkhela

Dear
I want to communicate an S7-1500 PLC with several Altivar 320 and 630 drives.
Could you help me with a guide?

nestorparades

Hello, If iwant to use telegram 106 what is the parameter?

MihajaAndrianarivony

HI, I WANT TO do communication Siemens S7400-H via on board MODBUS TCP, can i use onboard Ethernet/Modbus TCP Port ?? please guide my drive is ATV930

chin

please send me, hexcode parameter siemens to schneider profinet communication

mdmehedi

How to Set PROFINET Communication Between Altivar and Siemens PLC's | Schneider Electric Support

Step-by-Step PROFINET Configuration Demo: GSD Files, Addressing Parameters, Manual vs Automatic...

How to Set PROFINET Communication Between Altivar and Siemens PLC's | Schneider Electric Suppor...

TIA Portal: IO-Devices / PLC-PLC Communication

Assigning a PROFINET Device Name to a PROFINET IO Device in TIA Portal | Siemens Support | AWC, Inc.

Profinet Communication between CPUs in Tia Portal || PUT & GET ✂ Part-1

TIA Portal: PUT Command / PLC-PLC Communication

PROFINET Explained 🏭 - A complete introduction and overview (under 10 min)

Siemens S7 1200 PLC profinet communication | PUT / GET | TIA portal

How to set up PROFINET Communication with AC20 Variable Speed Drive | Parker Hannifin

02: Set PG/PC Interface to PROFINET in Sinamics STARTER

PROFINET Communication Setup | KEB Drives and Siemens PLCs using COMBIVIS 6 and TIA Portal Software

How to setup a PROFINET IO connection in Siemens TIA Portal

MS06E. [Siemens S210 #05] Setup Profinet IRT Communication for S210 Servo Drive (Telegram 105)

How to Configuration PLC S7-1500 and ET200S via Profinet Communication | PLC | HMI | SCADA | Automat

GD350A Profinet communicate with Siemens S7 1200 PLC

TIA Portal: Why can I not access my PLC?! Here are the PROFINET basics!

How to Set PROFIBUS Communication Between Altivar and Siemens PLC's | Schneider Electric Suppor...

PROFIBUS & PROFINET Configuration with S7-300

What is the Difference between Profibus and Profinet?

Siemens Profinet Coupler Data Mapping - TIA portal

Simulation and troubleshooting on Profinet communication

DANFOSS FC360 AND S7-1200 PLC PROFINET COMMUNICATION.

Connect SoMove to Altivar Process Drive via Ethernet TCP/IP or Profinet | Schneider Electric Support

Setting up TeSys island PROFINET communication with a Siemens PLC | Video 01 | Schneider Electric