Test Webasto Thermo Top C! First Test run.

A test run of the Webasto Thermo Top C Diesel water heater that I have brought to fit on the BrumTug Narrowboat To give the hot water.
Check Out this video when I run through the Webasto loom and how it hooks up to power the heater!


This is Webasto is a fully Recondition unit and I have put all the other parts together myself over the last couple of years like new main wiring loom, fuel pump, timer, etc. I would think the total cost to date is around £300.
Do have a look at my second video where I look more in detail at the wiring loom and pulsing the pump manually and test fire up again.

[gerryr]

I use mine to heat hot tub no more electric bills and heats very quickly

[davidwalker]

Is that the way to fit them with bracket on top or bottom ? I fitted one with bracket on side and exhaust coming out at bottom. Maybe why I’m having problems.

[Rampa]

thanks for the demonstration. I want to install it in my van using the secondary battery that is in the back. What section of wire do you recommend? Thank you

[timburberry]

Hello
I'm looking to install one of these in a
Do I need a fuel pump, or can I just have the diesel at height? What pressure does the pump run at??
Thanks

[dantronics]

Hello I have 4 of these, 2 thermo top c which I couldnt get working then bought 2 thermo top v, I manage to get the diagnostic software last weekend and can test each components but the heater will still not fire up, as far as I can see you only need 12v at pin 3 to start it up but still no joy, did you have to do anything to any of the other pins to get it working?

Hello, could you please share electrical connection of system? I would like to know how to start heating with +12V signal.

[numheed]

Hi, have you got a wiring diagram or know of one. Cheers P

[Hamish_A]

Hi, great video! I saw the time you used was a non-webasto one. I've got a fairly dumb, 7 day turn on only timer attached to mine, but the webasto prices for anything more sophisticated seem crazy. Of like to fit a time and temperature based control, like you find in a home. Is the control required just a 12v on/off connection?

[cropatrol]

Where to find the connection plan, wiring diagram. Send me a link please.

[Nengaro]

Pretty curious on the circuit you've made to run this. I'm about to set mine up for a similar setup but i'm unsure how to wire it.
Do you need to keep pulsing the pump once it's primed?

You got any information on what you did to wire it up?

[joshmilner]

Does this type blow hot air too or not ?