AVET SET THE DRAG

Показать описание

Capt. George Valentini and Capt. Rich Kosztyu discuss how to set up the Avet drag in the TackleDirect Flagship Retail Store in Egg Harbor Twp., NJ.

Рекомендации по теме

Комментарии

Thanks for clearing it up once for all first hand from the experts.

ata

Thank you for the clear and concise explanation. I have three beautiful Avet reels and I can't wait to use them.

PPMOCRG

01:25 "You want to set your drag to 1/3 the breaking strength of your this advice is often given but it is not a set in stone rule, just a recommendation. It also doesn't apply about as much as it does apply. A better recommendation is "your drag should not exceed 1/2 of the breaking strength of the smallest line on your reel". This would require you to set your drag at full. If using 30lb line you would set your FULL drag at anything under 15lbs. Different fish require different amounts of drag. For kings 10lbs is too much drag. Set it to 3-4lbs at strike which is around 6-8lbs at full. That puts you around 10% of line strength at STRIKE and around 20% at FULL. Anything less than 1/2 the breaking strength of line at full drag and you should be good....

mdees

I've never used a scale to set my drag..Out here in San Diego I've set my drag by pulling line off the reel, it's not as precise as a scale maybe but I've never got spooled or had a big tuna or yellowtail break off do to my drag being too tight..just my 2¢

jls