MikroTik(using VMware) - Setup: Interface, Address, DNS, Route, DHCP, IP Pool and Firewall

In this video I 'll:
- Deactivate all "Network Connections" and get the internet from the VM "MikroTic"
- Setup the "MikroTik" on a "VMware" Machine
- Edit the Virtual networks (Set Bridge and Host(without DHCP service))
- Add a Network Adapter to the VM
- Add Addresses to the "MikroTic"
- Change the password of the "MikroTik"
- Connect to the "MikroTic" using "WinBox Loader"
- Setup the Interfaces (Bridge and Host)
- Setup a "DNS"
- Add a "Getway" in Route
- Add "DHCP" Server
- Add an "IP Pool"
- Add a Rule in the Firewall
- Add a Rule in the Nat

PS :
The IPs :
10.5.50.1 is my real Getway
10.5.50.47 is IP located to ether1 - Bridge
192.168.0.1 is the IP of the Getway of the DHCP network
192.168.0.2 - 192.168.0.254 is the range of the DHCP addresses
1.1.1.1 is a false IP just to disable the Local connection

[lenovobr]

The best explanation for an Arab person online .... Thank you very much

[noornm]

هسة انته ضفت اثنين
LAN card
للمايكروتك,
يعني واحد منهم علاساس هو الي رح ينربط بالشبكة الداخلية والثاني بالانترنت او السيرفر بروافيدر!؟!
زين اذا هذا الشي صح, الايبي الي خليته للانترفيس بالمايكروتك المفروض يكون ال
Gateway
مال الشبكة الداخلية صح؟

[amir]

2 physical land cards are installed in this machine or 1 ?

[ProfMohamedAtef]

الحل فى إنقطاع الراوتر بورد عن الشبكة (LAN) و أيضا الوايرلس ؟؟؟
انا واقع فى نفس المشكلة و رجاءا الرد بسرعة