Milwaukee packout drawer trolley setup for electricians

Milwaukee tools Packout drawers. Having a deep dive into the drawers and how we can and should set it up. I also go through my whole electricians setup for construction.

inside drawers measurements:
Height 132mm, Width 410mm, Length 325mm

All details for the packout drawers and more can be found here:

Other tool related videos:

Milwaukee Wheel modification:

Milwaukee Wheel cart vs Rolling Box:

Milwaukee Packout front accessory

Should you buy milwaukee m12 drills:

Check out the store for tools and merchandise:

other links and discounts:

Contact details:

My other social media:

Instagram:

TikTok:

Facebook:

Reddit:

#electrician #Milwaukeetools #packout

0:00 intro
1:12 looking at the Packout drawers
3:09 I break the divider, oops
5:59 packout trolley setup
8:09 filling the drawers
9:11 do batteries fit?
11:03 bottom drawers rubbing
12:03 does a laser fit
13:19 should I use battery mounts? Stealthmounts
14:34 drawers setup fully packed
15:42 Milwaukee pouches
19:23 how many battery tools fit?
20:20 rolling around with the trolley & drawers
21:11 drawers onto the packout roller box
22:25 outro

[sharkatk]

Finally somebody who has tools and tool boxes with dirt on them oh, and actually look like they use them

[spevakdesigns]

I made my own dividers for mine from 1/8" aluminum sheet. I added a piece or rubber edge trim to the wider end, but a bit of tape could work also. They're super stiff and make it a treat to use.

[claygriff]

An actual review and it's thoughtful! Good work

[xXxBigOsoxXx]

“A bit of a bend” 😂you bent the shit out of it, i replayed it a couple times

[PhamVans]

I find myself always trying to re-organize setups depending on the jobsite.

I started with the backpack and rolling bag, then I got a full rolling box, but now I've gone back to a rolling bag along with the toughbuilt cliptech system.

Feels the best by far in terms of efficiency. So much easier to work with a belt, don't have to go up and down on the ladders.

[spevakdesigns]

Cheers mate, great video. Enjoy that beer! I'd highly recommend one or two clear Plano organizers (or similar) for your drill bit kit and driver bits and socket kit. Lots easier to see what you have and pick the right but it without dumping the pouch.

I'd love to see if an m12 fuel bandsaw fits in the drawers and if a full size 4.5"-5" (115-125mm) grinder fits with or without a battery. Thinking about switching out one of my metal fabrication boxes from that medium/large box you have hand tools in over to a 2 drawer unit.

[stephanb.]

Danke für die Präsentation.
Deine Schnitte und die Kameraführung sind echt mega.
Gruß aus Deutschland👋

[bryanmcfarland]

Hi Guys!!! I've been using the Packout Compact "Ammo Can" Tool Box to organize my hand tools. It's height and dividers allows the hand tools to be stored vertically making it easier to grab them. I even put my M18 impact driver in there vertically with battery. Also, I just found out that the DeWalt ToughSystem v2.0 deep/slim tool trays fit the Packout small and large Boxes, which is awesome when trying to stack tools on top of each other! Merry Christmas Everybody!!! :-)

[frost]

Bought the 2 drawer And the 3 Drawer about 4 months ago. My bottom drawer on the 2 drawer unit rubs to! It's definitely a design flaw of the 2 drawer unit.

[hobbs]

good video mate, i love the bag idea, for the guy who cant seem to get rid of his rubbish!!

[JaySellers]

About the best use of the roller box that I’ve seen is an air compressor mounted inside. If done right with an AC plug on the side or a wire wrap on the back, you’d rarely have to get inside the box. However, my need for a compressor continues to drop over time so it would end up just being dead weight.

[whip]

You can use a packout for your batteries. I use the full width bigger bits box one but with all the red boxes removed. You fit about 10 - 5ah batteries in there. Just for those days when you need a heap of batteries.
Use the middle narrow section for normal AA AAA batteries.

[hiltonr]

You could perhaps use one of the drawers for your M12 tools only , the other drawer for laser, misc batteries gpo’s etc, use the large packout on top for your m18 gear and lastly the packout milk crate at the very top for your hand tools, tough bag etc.
Once you get to site you are going to have your hand tools with you always, grab the M12/18 powers tools you need to do the job and the other gear is stored away out of site within your packout system.

[aresiusm]

Thanks for the review. And inside dimensions for the drawers. Now I know my socket set in its’ case won’t fit! I’m new to packout and trying to figure out my home DIY mechanic setup and whether Jack stands fit in the large box.

Main question I have for you though. Please could you let me know what music you are using @0:14 & 0:24?

[davidanderson]

I've experienced the same rubbing on both top and bottom drawers. So far no real problems but only time will tell

[serg]

Would be a good idea to maybe utilise the draws maybe for conduit gear by any chance or are the slots/sections too big that it would really be a waste?

[leemark]

I was considering the packout mounting plate screwed to a tstak trolley, wee bit of cutting to do but I think the tstak trolley and the festool sys roll are the best options for mobility at the minute

[sergioamescua]

Thanks for the videos bud. Question for you. Will the Milwaukee M18 deep cut band saw fit in one of the drawers?

[steffendetrick]

Milwaukee drill bit boxes tho it doesn’t look like you use them. That’s what I was planning to use one for but haven’t really got a good look at one till now thanks very helpful!

[cobuck]

I’ve experienced the same rubbing of the lower drawers when loaded up. I hardly notice it any more and haven’t experienced any issues aside from having to yank those drawers a bit harder.

Nice video, btw. In answer to your question about future videos, I’m less interested in what can or can’t fit in any Packout and more interested in how you end up using them. What organization is most functional and why?