Whirlpool F1 Error Code Fix

Model #WFE510S0AS
PART #W11122555 or W10424886 - shop around you can usually find it at discount

[HELLBOY]

I could not find a replacement board for less then 350, so I had my stove apart, noticed some liquid residue (water or grease) on the board and the buttons. Cleaned it all up, twice over, slammed the stove back together, no more error codes!

[stevewhite]

Just dropping a quick Thank You! While my model wasn't exactly like yours, your vid definitely pointed me in the right direction!

[michaelhasse]

Mechanical ovens lasted 20 years, my computer controlled oven is broke in 6 months

[VallejoQuiles]

Try to hold down the different buttons at the same time I was able to reset mine it never came back. I bought it from someone who said it wouldnt work. So on mine I hit the water level. Program setting and start at the same time. Most machine has a fail safe to do a reset or stop the process. If that does work try to replace the relays before you even attempt a board. Kind of. Like cntr alt del or a relay on board is bad. I also cleaned out the pump n line just in case. But the reset is what worked. It’s a damn good machine

[maryjopaoni]

We bought a Whirlpool gas stove 4 years ago, had no problem until last month (Sept 2022) then had F1 appear when having the oven set at 425°, beeping, cancel everything, reset at lower temp, F1 again. I Absolutely HATE ELECTRIC THINGS!!!! Finally used our outside electric just plug in oven. Works good!

[apocalypse]

Superb video brother!
Clear and concise.
Excellent editing.
No bs.
Thanks for sharing your knowledge.
Peace and blessings.

[anaanderson]

The control panel on our washer went bad and the washer stopped working. Whirlpool service said they have no control panel replacement parts in stock and don’t know when they will get one. In the mean time I am having to pay a laundromat to do our laundry and into the third week not knowing when it will be resolved.

[beccaangel]

dang digital stove! 1950 & 60's lasted way im getting a wood stove 😠

[chadsheppard]

Had an F1 E0 error code, the old circuit board is blown, should I replace it and that’ll clear the problem?

[calvyoel]

3:20 that is the natural sound effect into ur phone from plugging it in, right? Did it when u unplugged too. Sounded cool.

[deysilara]

A question when the screen on my stove gives an error, do I have to change the card?

[michellereed]

I have a similar model with an F1 code but this range is less than 1 yr old. Do I really need to spend $200 on a new board? When I turn the oven on to preheat, it will turn off and display the code almost every time I set a temp above 350.

[Cometlandscaping]

I went through this last year in April 22 and Board was replaced by a tech all was ok.
Now this year my Oven Temperature is off by 50 degrees a tech came out and swapped out something but my temperature is still off by 50 degrees again within 1 week, should I just get another stove?

[sonofadam]

This is a part replacement video not an error reset video, why you have to go and make things so complicated, that's why I like to barbecue🔥.

[erickgarrido]

Any idea on how to resolve the FSE1 error?

[N.Az-Mill]

Are you experiencing a hard time getting parts for things these days?

[sespider]

Mine currently says F2 and nothing more, that I can see. Unplugged for two hours but it still says the same.

[Marisss.]

En mi cocina Whirlpool me sale "F2" y no me deja apretar otro botón del panel

[thegrownsimmer]

Yea this is too fuckin much just to bake some damn chicken 🙄

[patrickb]

Whirlpool has replaced 4 boards and still an issue. However, I plugged in an extension cord and the issue stopped until I removed the extension cord. I am still getting E2 F1. Any ideas????