Cutting a clock wheel on the Schaublin 102 lathe.

Показать описание

Part 3 of 3 of the repair to the Chronometer train wheel. In this video I cut the teeth using the holder made in a previous video mounted in the Scvhaublin 102 lathe.
I then re-fit the wheel to the arbor.

Clock repair using a Schaublin 102 Lathe.

Рекомендации по теме

Комментарии

I love the part @12:37 when you turn on the lathe and there is a ever so slight wobble on the wheel which goes away when you press the tool on it. That's the best part of this job, when things turn perfectly again.
Cool little series on a superbly done repair.

Mr.Fabulous-

Congratulations on a job well done. Kind regards

slawomirmateja

Very well done video . Glad to see that you showed all the steps in your process. Thanks

markfulmer

Thank you. the retention of the wheel on the arbor, the removal on the anvil, the use of stakes and the lathe to finish and reivet the job was invaluable to me. i had to swap the arbors on two escape wheels (one with 45 and the other with 48 teeth) and by following your craftsmanship as best as my tools allowed I have exchanged the arbor and rivetted the wheel and it is a successful job. i am happy and the chiming clock now runs as it should. my sincere thanks for the detail and care you have taken in this video

s.spencertenagodus

Thanks again for taking the time to record this repair. I have never seen your spin rivet technique but I can't wait to give it a try!

steveshroyer

First time viewer. Excellent work saving the wheel, showing a quality repair only adds to the value and it's life story

gayles

Your videos are very informative Tommy. Keep up the good work!

smalcstein

DAMN SUPERB!! YES!! THIS IS A GREAT AND INCREDIBLE PERSON DOING A GREAT AND INCREDIBLE JOB!! THANKS!! THANKS!! THANKS!!! 1000 TIMES THANKS!!

luisdardis

Hi!Thank you for explained us the process of making gears, i like this video so much!

kostandin

Very enjoyable video and well executed. Pretty nerve-wracking at times. It only takes one little slip...….

brianwarburton

great lathe, but one trick I saw on youtube with one of these small machines, if you want a 'sanity_check' put a sharpie highlighter pen in a collet, and run a cycle, only thing on the part is the ink, so good way of checking what you think the settings will give you, but with this ink and a pitch guage.

andyvan

Very nice video! Thanks for your work. Where did you bought the cutters? I am trying to buy very small modules.

oovlocityoo

Hi Tommy a another great video You ask about Microscopes. I use one of the cheap Usb microscopes if you want I will post a link for the one I use on my mill and lathe.

BobsModels

Impressive!!! What is the module for this gear?

iliakovalev

Been a bit caught up in rocketry of late. So a little behind. Desire, skill and having the correct tools are just the basics. Focus is amazing.👍🕰👍

shadowraith

I figured you would cut a tooth with the gear absent, then rotate the gear into position knowing it was aligned.

carbidegrd

Cutting a clock wheel on the Schaublin 102 lathe.

Clockmaking - How To Make A Clock In The Home Machine Shop - Part 4 - Cutting The Wheels

Clockmakers Clock Wheel Crossing Out Marking Jig

Marking Out Clock Wheel Crossings

How to make a clock wheel I Shaping Science episode 3

Cowelłs Lathe Digital Spindle Divider / Indexer - clock wheel cutting (90ME)

Cutting a clock wheel on the Tormach

Making a Clock Wheel for an Antique Clock - Start to Finish!

Cutting a clock wheel on the Schaublin 102 lathe.

Clock Wheel Cutter

Cutting 144 Teeth on a Clock Wheel

Clock Wheel and Pinion Cutting on the Cowells Lathe

Setting up a Schaublin 102 to cut a clock wheel.

Cutting Wood Gear & Clock Wheel Teeth

#033 Cutting a new set of teeth for a clock gear wheel and making our own lathe dividing plate!

Cutting clock wheel (Onofrio Federico - Watchmaker)

Regulator Clock Motion Wheel Cutting

Wheel cutting for a wooden clock using a scratchbuilt pantograph router

Clock wheel cutting using sherline indexing. On schaublin 102.

Clockmaking - How To Make A Clock In The Home Machine Shop - Part 5 - Cutting The Pinions

Re-pivoting a clock wheel - At the bench with Jobson Clocks.

Cutting a Helical Clock Wheel #shorts

Making A Clock - Part 2A Cutting Gear Teeth

#007 Making a new date wheel for a 19th Century longcase clock

Cutting and Finishing Brass Clock Frames