2000 Electraglide FLHTCU-I OEM Turn Signal Repair

2000 Harley Davidson FLTHCU-I Turn Signal Repair

PROBLEM: After riding for about 1-2 blocks my turn signals would quit working.

I checked my switchs and my wiring, I ohm'd and checked for signal to the Turn Signal Module and everything was GREAT.... then I'd ride for a short ways and then the turn signals would just stop working.
I searched the web over and over and found NO ANSWERS! (that I liked)

Here's your answer!! Watch my video & if it helps you out, please leave a thumbs up and please be sure to SUBSCRIBE to my channel

[kdssap]

Found mine on my 1992 low rider. It was more on the side and not under the seat, but it looks the same. Thank you very much. Now I have to find a new one.

[Rick-Williams]

I have an 02 Ultra, the turn signals started with not cancelling after turns, then no start after riding a while, found to be my TSSM, Turn Signal Security Module. Glad you're fixed.

[randymccalla]

Very good video, Never knew that was there, If I had to do that to mine, I would bolt a outlet box to the bike, sideways at the attachment point, for the module, and then bolt the module to the box, at least two inches higher up.👍🇺🇸

[bobholland]

Excellent simple video. I saw this and thought "I have one of those in my stash" found it and fitted it and it worked...many thanks

[bigmess]

Great video. I've been looking everywhere for help on this.

[burrco]

Good video, I put new bars on my 97 model, having turn signal problems. I'll check this out. I'd pit a small strip of heat wrap on the bottom so your new one doesn't get to hot. Thanks good video.

[howardmiller]

I have a 2017 ultra limited my front turn signals don’t work but the back two do, if I take out the 50 amp fuse that runs the bike and then plug it back in they work until the next time I shut the bike off, when I turn the ignition back over, they won’t work again do you think it’s to turn signal module?

[tayloredu]

Good video no bullshit straight to the point thank you sir

[blbnkbm]

Wow! I have been having trouble with my blinkers on my 03 i will dig into it later today. Thanks

[norcal]

So what does the valve cover have to do with anything?

[paulrevere]

Did you not think of making a small square metal plate for the new module to sit on? This might keep the module from over heating again.

[davidsantistevan]

I have a 2013 ultra classic electra glide. Just lost the left signal. I'll look into the module now after bulbs, plugs, and wiring thanks

[mysecondary]

Can you post a link to the website as to where you bought yours great video by the way very helpful

[billschumacher]

Have you considered relocating the module, , , , just a thought

[BenjaminKX]

I have 2006 FLHTCU with Factory Alarm. I'm guessing this would be the same location for the TSSM (Turn Signal Security Module)? I will be checking when I get home.... My little red key on my gauges came on over the weekend & now I have no Tachometer or speedometer! I have been having some issues with turn signals since last Hopefully this helps as n ihave tried to get codes by holding down the trip button and turning the switch to on(with RUN on too) no luck there.

[stevereeves]

I have a 2000 electriglide classic and I I can't find the ECM
Can you send me a video of where it is located at?

[midwestprince]

Looks easy to relocate and zip tie to a safer location 🤔

[tyyt]

You put the New one right back in the same spot lol

[gastramp]

Can you post the part number?
Thanks.