GS1299 DIY FM Radio Kit

Показать описание

Рекомендации по теме

Комментарии

Finally got mine assembled and it works. Wanted to update my thoughts on "no antenna". I believe like many pocket radios that don't have a speaker and require earbuds, the wire connecting the earbuds acts as the antenna.

captjon

I recently purchased this kit, wish I had known that you had instructions, although it was fairly straight forward. It does work amazingly. I believe the blue led indicates power, the red one shows charging and then green when fully charged. Mine came with 2 blue leds, so I swapped one out with a green and now it's good to go. Thank you for the upload.

TMRu

This is NOT a transmitter... it's a reciever.

richysradioroom

lol trust me i would buy one if i had the money i love doing stuff like this lol but yeah i take apart stuff all the time so this would be cool to do since i know how and have all the tools to do it lol

jimmyross

yes but does it go to a speaker oh and is the small 22 capacitor go where there is no value markings?thanks john.

johnibbertson

I didn't understand!!! Is it a radio receiver or a fm transmitter as we can see in the tittle???🤔🤔🤔

gaiamaedeprometeu

looks fantastic, but isn't a transmitter. Just a receiver. Is it right?

piniflopa

i know about the jack plug, but as i say does the cable from jack plug go to an 8 ohm speaker because i switch on and blue light comes on but where does sound come from, im only a novice, soldered chips ok, no continuity between them all. john. need your advice?

johnibbertson

So, I was looking at these on eBay and the Gs1299 integrated circuit is in the title. The Gs1299 is also shown on the PCB board. But I don't see any ICs or IC sockets in the kit. So, my question: is the Gs1299 IC contained within the PCB?
I was interested in this kit, for the sake of experimenting and modifying the kit. I was interested to see if I can modify the circuit to tune into higher frequency bands (air band). However, if the board contains ICs, I'm not interested in it.

bit

Do you have a picture of the component layout I can use as a reference? It seems like there are more component locations than parts supplied.

captjon

Volume buttons + and - are not working. Can you please advice why?

matusg.

Could not figure out how to post a picture here for you.
I took a high res photo for you, go to my blog site here to see picture:
Scroll down the blog a bit and click on the picture and you will see everything on board

DIYELEKTRONICKITS

GS1299 DIY FM Radio Kit

GS1299 DIY FM Radio Kit

Banggood radio FM GS1299 DIY

Собираем мини стерео FM радио GS1299 с выходом на наушники и аккумуляторным питанием...

GS1299 DIGITAL RADIO KIT BUILD #AliExpress

DIY FM Radio kit assembly

Electronic Diy Kit FM Digital Radio Welding Kit | Training Welding Production Kit @zero-zone420

Ali diy FM stereo radio kit. Works like a gem

Building an FM radio | how to make FM radio from a kit

ICStation GY18972 FM Radio Kit assembly

FM Micro SMD Radio DIY Kit Frequency Modulation DIY Radio Electronic Production Training Suite Radio

DIY FM Radio #fm_radio #icstation

FM стерео радио приёмник с корпусом GS1299(набор для сборки)....

For Future Scientists/Engineers – VER 2 FM Radio Kit - Part 1

ICStation GY18971 FM Radio Kit Assembly

FM Frequency Modulation Micro SMD Rdio

FM Radio Transmitter DIY Kits

Makerhawk AM/FM Radio Kit Review

BangGood One Transistor FM Wireless Transmitter Kit

ICStation Digital FM Radio Kit Assembly

fm radio kit

Печатаем на 3D принтере корпус для мини стерео FM радио GS1299...

Digital FM Receiver DIY Kit (TEA5767)

A FM RADIO KIT VOGURTIME

(287) FM Radio DIY Electronic Kit DIY Building