PFF88-202 Powerflex Official Fitting Instructions for Front Arm Rear Bush Volvo 240 260 1975 to 1993

preview_player
Показать описание
04/05/2012 Powerflex Released Full Car Set for Volvo 240 (1975 - 1995) and 260 (1975 - 1985) In this video we tried to show how to remove original Front Arm Rear Bush and replace with Powerflex part number PFF88-202. This is part of new set of fitting instructions for Volvo. Please check more videos on our channel.
  1. PowerflexEPTG
  2. Front Arm Rear Bush
  3. Front Anti Roll Bar Bush
  4. Rear Beam Mounting Bush
  5. Official (Profession)
  6. Cars
Рекомендации по теме
PFF88-202 Powerflex Official 0:03:24

PFF88-202 Powerflex Official Fitting Instructions for Front Arm Rear Bush Volvo 240 260 1975 to 1993

Volvo 240 suspension 0:01:06

Volvo 240 suspension bush install

Volvo 240 Trailing 0:07:44

Volvo 240 Trailing Arm Bushing Swap

Upgrading the Brakes 0:18:07

Upgrading the Brakes on my Volvo 240 [Part 1]

Volvo 240 update: 0:03:48

Volvo 240 update: bushings and struts

premierstart volvo 240 0:00:26

premierstart volvo 240

Cat at the 0:04:11

Cat at the junk yard

My volvo 242 0:11:06

My volvo 242 16v Turbo project EP9!!

David Power Driving 0:13:57

David Power Driving in BMW Compact Cup 2012 Race 2 at Brand Hatch 29/04/2012

Комментарии
Автор

Exactly the info i needed!!THANK YOU SO MUCH!!SO SO MUCH :-)

nebojsabobic
Автор

I've just tried to fit this.
I got the old one out really easily.
On the new one, the inner sleeve is tight around the control arm, I mean like an interference fit. which doesn't seem right, but looking at this video, it looks like the old inner sleeve was tight, as you cut it off. and also you added all the grease to the outside of the inner sleeve, so is the bush supposed to pivot around this?

Also the inner sleeve is longer than the control arm shaft, so when the nut is tight, it nips the inner sleeve tight. it also pops the bush out around the washer. I've fitted a bigger washer i'm just concerned that.

is that right?

manack