filmov
tv
ExpressLRS - How to flash ACCST X9D & FrSky R9 system with it.
Показать описание
Express LRS is a low latency system firmware that is open source and give the user more real-time control over their quads. This video may be long but it is broken down into steps to specially help those who wish to update their 900MHz system by re-using the hardware of their 2019 R9M and the respectively long range FrSky receivers.
Time stamp and sequence of steps :
0:47 Four reasons why you must replace your R9 long range FrSky Firmware with Express LRS.
Step A : Update Radio with latest OpenTX Bootloader and FW
5:11 A1 : Download latest OpenTX SD card content
6:05 A2 : Create folder in computer to store the new SD card version
6:47 A3 : Download Latest OpenTx companion
7:14 A4 : Install OpenTX companion to Download FW bin file
10:19 A5 : Update Radio with latest OpenTX version
11:49 A6 : Flash latest bootloader into Radio
12:25 A7 : Flash latest Firmware (currently 2.3.11) into Radio
Step B : Collate and prepare the files in the SD card
13:01 B1 : Download from website the special OpenTX for ExpressLRS
14:23 B2 : Download from website the ELRS bootloader for R9M
15:11 B3 : Download ELRS configurator and install it.
18:54 B5 : Download the receiver's bootloader .frk file
19:35 B6 : Download the lua script for setting of ELRS parameters
20:58 B7 : Copy folder into SD card.
Step C : Flashing the Bootloader & Firmware into radio, module and receiver
21:12 C1 : Flash the special OpenTX Firmware to Radio
22:56 C2 : Clear the SDcard warning of wrong version
24:48 C3 : Flash R9M module with ELRS bootloader & Firmware
26:23 C4 : Flash the quad's receiver with the ELRS bootloader
32:02 C5 : Configure Betaflight settings
35:38 C6 : Soldering the receiver to the Flight Controller
38:36 C7 : Flashing ELRS firmware from the ELRS configurator
42:09 C8 : Verifying the Stick's input with Betaflight & telemetry
44:28 C9 : Changing the transmitter parameters via the Lua Script
46:23 Ready for a test flight
#E5liteHD #ExpressLRS #fpvfreestyle #elrs #freestylefpv
Time stamp and sequence of steps :
0:47 Four reasons why you must replace your R9 long range FrSky Firmware with Express LRS.
Step A : Update Radio with latest OpenTX Bootloader and FW
5:11 A1 : Download latest OpenTX SD card content
6:05 A2 : Create folder in computer to store the new SD card version
6:47 A3 : Download Latest OpenTx companion
7:14 A4 : Install OpenTX companion to Download FW bin file
10:19 A5 : Update Radio with latest OpenTX version
11:49 A6 : Flash latest bootloader into Radio
12:25 A7 : Flash latest Firmware (currently 2.3.11) into Radio
Step B : Collate and prepare the files in the SD card
13:01 B1 : Download from website the special OpenTX for ExpressLRS
14:23 B2 : Download from website the ELRS bootloader for R9M
15:11 B3 : Download ELRS configurator and install it.
18:54 B5 : Download the receiver's bootloader .frk file
19:35 B6 : Download the lua script for setting of ELRS parameters
20:58 B7 : Copy folder into SD card.
Step C : Flashing the Bootloader & Firmware into radio, module and receiver
21:12 C1 : Flash the special OpenTX Firmware to Radio
22:56 C2 : Clear the SDcard warning of wrong version
24:48 C3 : Flash R9M module with ELRS bootloader & Firmware
26:23 C4 : Flash the quad's receiver with the ELRS bootloader
32:02 C5 : Configure Betaflight settings
35:38 C6 : Soldering the receiver to the Flight Controller
38:36 C7 : Flashing ELRS firmware from the ELRS configurator
42:09 C8 : Verifying the Stick's input with Betaflight & telemetry
44:28 C9 : Changing the transmitter parameters via the Lua Script
46:23 Ready for a test flight
#E5liteHD #ExpressLRS #fpvfreestyle #elrs #freestylefpv
Комментарии