12 Volt Tire Pump and Mini Air Compressor

Using a 12 volt 250 PSI mini compressor/tire pump. This pump plugs into your cigarette lighter socket and pumps up a tire by 35 psi in under 10 minutes. If you found this video helpful, please subscribe to my channel. Thank you.

Disclaimer:

Under no circumstances will Knobsdialsandbuttons be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Knobsdialsandbuttons or a third party. In no event shall Knobsdialsandbuttons be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Knobsdialsandbuttons, it cannot guarantee against improper use or unauthorized modifications of this information. Knobsdialsandbuttons assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Knobsdialsandbuttons recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Knobsdialsandbuttons, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Knobsdialsandbuttons.

[Steph_Said]

THANK YOU for showing the lock feature. I had no idea what it was for; which is why I deflated my tire a bit. Better now.👍🏽

[hadzhir]

I had one of these for my motorbike. It's struggled to get that properly inflated but for inflating punctures on a road trip enough to get you to a gas station with a proper air compressor it was fine.

I feel like it would over heat for car tires.

[LittleAngelsHub]

Totally worked for me .
Had a full pump in less than 10mins.

[terminallyelleofficial]

Brilliant video, even for a car noob like me ❤

[funkiEst]

In my case it works better attached to a piece of Wood for a bigger flat settlement to the ground and i try not to overheat It avoiding long time functioning for more than 10 minutes... And i dont know why the last tyre i've inflated indicates like 5psi or more while Its clearly and visibly not so inflated... Anyway this pump has been working properly for me for a while.

[ahmuta]

Enchi 3 bexigas e já saiu fumaça de tudo 😂😂😂

[dokxhfm]

How much amperes taking by the motor because i connected 7ah battery but wires melted and smoked

[evanrizo]

It looks great, but can I use it for internal dusting of a desktop PC?

[justincredible]

How do I adjust the pressure? When I start up the needle moves to 60 and I'm sure my tyre isn't carrying that much pressure.

[Lynvlog-mdqc]

How much compressor 😮 done full support

[cgs]

Does the car engine have to be running? Your video does not say.

[shonelattimer]

If the cord goes bad, I wouldn't recommend using a standard power cord, that is unless you rather like the in-house fireworks..lol. Fired, èeè first day on the Vacation time .

[laltharzela]

How long it take for full pump of 1 tyre? I thint its around 15 mins

[haansworsie]

Can you control how much PSI comes out of this product for a specific Device, like a Air Brush that only uses 30PSI?

[vijayn]

Compressor looks so tiny,
does it work well for long time?

[Jeddfdlr]

when mine reaches at its desired number 36 and i stop it, the arrows goes back to 25. Should i pump it again?

[thedevilsreject]

Could this be used as an air assist for a laser engraving machine?

[jvsvideo]

is it possible to used this pump for replacement for foam machine?

[alaekhaidar]

I changed the cable and set controle button you should lift the car from the empty side

[besaloem]

Anyone know roughly how long it takes? Mines on 8 and need to get it to 30. Done it for about 3 mins and the gauge weren't moving so disconnected it. Thought i'd left it in too long or done it wrong but obviously not. If I knew roughly how long it takes i'd know if I were doing it right 😂