| DIY | PALLET CHICKEN COOP | Dismantle Pallets FAST! |

In this video I briefly explain the benefits of creating a DIY custom chicken coop design using pallet wood and other recycled materials you can find for free or at very low cost. Using pallet wood is a popular method for building sheds, chicken coops, outdoor furniture and many more but a lot of these projects can require dismantling the pallets, so stick around to the end of the video where I explain the most efficient way (in my opinion) for retrieving intact pallet boards for project use.

[victoriadickerson]

This was so very needed for me to know about the 4×4 block to get nails out. Thank you for sharing your wisdom

[BarryWatson]

That method of breaking down the pallet with the 4x4 and jumping is a game changer! Great ideas are sometimes the simplest!

[Road_Rash]

Well, I just changed the design of my coop/run, as well as my method of breaking down pallets...Lol! I'm pretty much down to wire & fasteners, but I have quite a few boxes of screws & nails on hand to get through before I have to buy anything else... probably down to wire now, because I just cut quite a few small trees I can use to frame the run with...for a short video, it's got a lot of good information & ideas... I like that...short, and straight to the point...🖖🏿😎👍🏿

[Sweetest_of_Seven]

Love the look of the coop but definitely like the idea for breaking down the pallets!!! 👍🏼

[katrinawoody]

Thank you very much for the idea with the 4x4 block I've never seen pallets torn apart that way before I'm going to try it tomorrow because I have a stack of pallets out back that I have been trying to pry apart by hand with a crowbar hammer and flathead screwdriver which is very frustrating.

[frankieboy]

I'm just finished breaking down twenty-five plus pallets and now just starting to build the base. I'm still going to be in it by about five hundred but if it wasn't for recycled material it would be over a thousand easy. I bought a similar pallet buster and worked great.

[yoiyomismo]

Great tip for taking out the boards of the pallet, thank you!

[jawnaraestokes]

Nice! Splitting those pallets with a 4x4... awesome. :)

[ramhornjoe]

Nice build, I'm currently collecting pallets for a coop build 😃

[MyBeautifulMuffins]

That block tip is going to be really helpful! I was using a crow bar and hammer to remove nails individually 😅

[EnhancedSimplicity]

Thanks for sharing this video. I've saved this video & did a screenshot... i will make my coop similar to this. 👍🏾

[boostjunkieMike]

👌🏾😎👍🏾👍🏾well done, thanks for sharing👏🏾

[jt-gmji]

I use a sawzall wnd just go under each board cutting the nails

[TipTomi]

3:05 Thanks for great idea how to disassembly europallet by placing a wood block under it. I'm building chicken coop too and was scared how long I spend on single one using crowbar.

[ninaashton]

No nesting boxes? Put a table across the back with roosts above and sweet pdz on the top of it. Put nest boxes below table.

[karrenbrazel]

I love the way you just good ol jumped on the pallet board to separate the wood, this is what i am going to be doing....and I need a lot.
I even bought myself a reciprocal saw, but your way is simpler.
Nice chicken am going for something similar

[rlboone]

I use a Sawzall then angle grinder to buzz the nails off

[sarahcrooks]

I'm a bit late finding this but it'd be so helpful if you could explain how you manage to get one pallet on top of another (vertically). Pallets are so heavy and I'm having trouble convincing my husband that it's possible!

[ErossaanBooming]

Nice mroject5! 300 boards. I'm at 20 🤣🤣

[codybelcher]

Did you use pallets on the floor ? If so, how strong/ how well is it holding up