Unboxing | CR-Laser Falcon (10W) Unboxing and Installation

Give you a first glimpse of the CR-Laser Falcon.
Show us your first cut & engrave!

CR Laser Falcon:

[LadyinPNW]

This is so helpful to watch. My 10 W falcon laser comes today along with air assist and accessories ❤️ can’t wait to get started

[wolfblade]

I did not know I could hang the depth gauge on the frame, that is awesome! I just got my 10W last week and already am obsessed with it. I can’t wait to try some acrylic with it.

[gilliamoso]

Very helpful, only took about 15 minutes to assemble, including a couple of mistakes I made. I would add a prominent note in the caption for the micro SD card that I did find in the documentation: the file you want to cut/engrave should be the only file present on the SD card.

[darren]

1 flaw: you didn't mention that Creality recommends updating Controller & Laser Firmware first. Besides that, nicely done!

[Jkauppa]

so why the laser head slams to the end and beyond of the x-rail, then stops working (forced self-shutdown).

[entreiPadsycuadernosenYouTube]

Im having a problem and when I try working offline, the machine wont work after powering on and waiting for it to reset, even though I have put the laserburn design in the TF. And when I try to work real-time, my Mac and the machine won't get connected through the USB-C cable. What should I do? ive been like this for two days. Thank you.

[omsrilaxmimahadevinamaha]

Hi. My red acrylic laser cover melted because the mdf caught fire. Can I buy just one lid? And what is its measurement, please so that I can get a piece of mdf to calculate the height as I am having difficulties now as there is no way to do it without the lid. Thanks.

[nated]

Will there be an official Creality Air Assist option for this?