I Make 230v 5000w Inverter from old Microwave Transformer

preview_player
Показать описание
I Make 230v 5000w Inverter from old Microwave Transformer
Рекомендации по теме
Комментарии
Автор

Why every time you make video content doesn't tell you the types of components you use, such as diodes (in other videos), transistors or mosfet even capacitors. And my advice is better, you answer questions from your subscribers or I'll just unscribe later. Please answer

thurmanpasbon
Автор

Five thousand watts my arse. The transformer is rated at no more than 1kw and those transistors aren't beefy enough. Oh and 5000w from a 12v source needs over 400 amps, so why is it all wired with thin wire?

andyhowlett
Автор

Great vídeo! Can you tell us how you feed this Inverter? Edith 12 v? Por 3v? Or AC volts ? Pls tell us

rafsel.sanchez
Автор

Спасибо за материал!!! Надо бы транзисторы на теплопроводную пасу посадить КПТ-8.

ВладимирБарашкин-пм
Автор

I really appreciate your efforts, but do you know that all your mosfet transistors were tite on the same heat sink and your transformer cable was connected on the same rael please take note

simeonojo
Автор

I was waiting for the still 😢😢😢, great video, please do 🙏 another version with microwave transformer and power drill n other heavy stuff like iron n kettle....❤❤❤❤❤

elmultimediaschoolofartscu
Автор

Again I want to commend you for doing good, but you are not carrying your students along, so how do you expect us to pass?
Can you please tell us the exact name and specification of each components.
Thanks

greatdavid
Автор

вау, это чё, то о чём я тебя просил почти. без моторчика . круууть. давай ещё.!!!

АлексейВасиленко-яы
Автор

1- Not possible. The way you have connected all four drain pins of the mosfet directly to the heat sink is definitely a shot circuit. I didn't see any insulation between mosfet and heat sink.The transformer winding are therefore shorted.
2- The secondary of a microwave oven transformer is a high voltage, around 5kv, enough to burn those mosfet (IRF3205) instantly because they can only sustain a 55 to 60 volt maximum,
3- You show on the meter A DC Reading, if those mosfet were oscillating to high voltage ac you'll no longer have a meter. it will be toasted.
4- As others pointed out, An honest inventor will not hide anything, like those wire that no one knows were they attached to.
5- Please get real tools for a credible projects. Do not use a rusted scissor to cut wire get a real wire cutter.

spanishathensalabama
Автор

Vc deveria detalhar de onde vem as alimentações, e o centro tape. Muito bom agora falta detalhar para que as outras pessoas possam montar. O you tube é para isso para compartilhar conhecimentos, fica muito a deseja vc expor um vídeo só para mostrar para as pessoas que funciona os seus conhecimentos sem compartilhar.

antoniopinto-xz
Автор

I respect your thoughts. I would appreciate it if you could also let me know the part name, specification, and circuit diagram.

zmaruche
Автор

Great. Can it work with 12v battery? Can DAT same connection go to electricity?

nnejiamaechi
Автор

Vi a maior parte dos comentários que é fake. Vc é capaz de provar o contrário? O mundo inteiro espera a sua resposta.

robertosoares
Автор

Diagram?? Or type transistor? Resistor?

ninopriyadi
Автор

It can not be 5 kW at 50 or 60 Hz. Core size will not support the required flux. If not too much core loss at 400 Hz, 5 kW may be possible at the higher frequency.

katzajamas
Автор

Sugestão de vc colocar escrito na tela a descrição das pecas usadas e ligação a cada procedimento feito

robersoncarmoleite
Автор

I contacted diode rectifier to make battry charger from it but rectifier heatup alot why ?

shakirkhan-orzk
Автор

My transformer is 110v . Is the same Circuit?. Tanks in advance.

juancarlossavin
Автор

If i have 37v battery then what should i change on this circuit to make it work?

adamdajka
Автор

Como se que lo tu haces funciona si nunca dices que tipo de componentes usas

servioacosta-fd