550hp Fox Body Mustang 347 Stroker Drag Racing

Fitted with a well dressed 347 Stroker, Roger's 1992 Fox Body Mustang kicks in 550hp and is no stranger to drag racing.

When a friend offered Roger this Fox Body Mustang back in 2017, he didn't miss the opportunity to acquire a proven drag racing winner. Most of the mods were already done, so Roger just changed the 347 Stroker engine heads with Trick Flow aluminum ones and put on Aerospace rotors, spindles and calipers.

Roger Miller's 1992 Fox Body Mustang sits on K-member front suspension and QA1 coilovers on all four corners. Fully equipped for drag racing with glass trunk and hood to reduce weight, 10-point roll cage and all the safety goodies the car runs consistent 6-seconds.

The 347 Stroker engine under the hood of Roger's 1992 Fox Body Ford Mustang is also equipped with Roller cam, rockers and solid lifters. The power is sent to the ground through Powerglide transmission and Moser 8.8 rear end. The car weighs 2,200lbs, sounds and runs great.

Let's connect on Facebook:

[HotAmericanCars]

Did you enjoy this mean Fox Body Mustang video? Subscribe for more!

[peteartussee]

That is absolutely one beautiful fox. Great video sir. Keep up the good work

[Justthatguy]

Would be a fun street car for Saturday or Sunday nights out on the town

[plymouthdie-castreplicas]

I don't like Fox Mustangs so much, but this one is incredibly brutal! And the sound...

[aaronchristie]

Man i hope mine sounds as sweet when she's ready.

[billymanilli]

Mustang! Looks SICK in the thumbnail, btw!
Can I ask a question, if you dont mind? I'm almost done building an 87 notch and putting down about 50hp less than you are... Car is very light, however, it has a dash still and panels/ headliner, but all the sound deadening ripped out and anything else it doesnt need to go, but look pretty "stockish" at a glance.
Anyway, my question is, did you notice much difference with the wing on the car? I'll be running the full quarter and maybe some no prep 1/8th mile with probably a 255 or 275 60 15 drag radial (235 60 15 for now b/c I have a new set that were really cheap)... Wouldn't mind putting a small wing on the car if it'll help.. or do you think it's not enough to worry about with my car?

[triplehfarmsllc]

I’ve got a fully build dart block 347 with afr 220 the some secrets haha plus nitrous motor it runs 6.38 1/8 and I’ve sprayed a 300 shot and ran 8.81 1/4 and you can do the math what the 1/8 was but it’s been fast in the 1/8 with the gear change. But your car is beautiful and hope you still have it

[miguelsanchez]

Hey I was wondering what is a good set of head and cams to put on a 351 block to make about 500hp also what would I have to do to the block ?

[petemedina]

These fox body mustang were pretty potent stock especially if you got the manual transmission. It would of been nice if it would had more info and specs

[matstang]

What did he run in the 1/4 with 550 rwhp and what weight

[cliffordlatko]

What size are the slicks? And did they have to mini tub it?

[gmangasco]

Did you buy the basic chassis from a gentleman in Michigan?

[MrBudwipe]

Damn it sounds mean. :-)
How long is the track in the video.

[waynekur]

my dad has one of these without drag mods though

[boostcomp]

is that wheel horsepower? even bhp still crazy

[rustykrys]

What’s the setup? I’m curious cause I built a 347 I’m estimating to be 500hp.