Harbor Freight Trencher, simple 'outrigger' storage.

A new way to store the outriggers. So simple, why didn't I think of it before. I used 1/2"x 3 5/8" pins. #homesteading #farming #harborfreight #towabletrencher

[DanielDeLoach]

Nice mod. I always just throw mine in the back hoe bucket, but mine never leaves the property.

[markbryant]

When you have the outriggers on it and working, what is the distance between the outriggers where they contact the ground ?

[terrancefitzgerald]

Can you drill a hole through the outrigger mount that slides into the channel 90 degrees from the existing one & slide it back into the normal slot with the outrigger pointed up? Would that leave enough tire clearance?

[chriswilson]

Greetings!
I have an unrelated question:
I modified my trencher to work on the 3 point hitch of MF35.
Problem is, I disconnected the hydraulic lines and cannot remember which hydraulic line goes to the pump. Is it the one to the left or right ? (When sitting on the machine)

[almirria]

I wish I could afford one
I can not even find a used one to purchase either

[jtsokiehobbyandadventures]

To make little easier may weld the pins in place and then only worry about the keeper pins. Just a thought. Less to keep up with. Only have to tack weld

[jonathanbritton]

Could you just store them with the extensions the other direction and not worry about hitting it?