LG Refrigerator Condenser Fan Motor Replacement #4681JB1029D

preview_player
Показать описание
This video provides step-by-step instructions for replacing the condenser fan motor on LG and Kenmore refrigerators. The most common reasons for replacing the condenser fan motor is if the refrigerator is not cold enough or is noisy, and the problem isn’t simply something caught in the condenser fan blades.

All the information in this fan motor replacement video is applicable to the following brands: Kenmore, LG

Tools used: multi-screwdriver, adjustable wrench, pliers, short Phillips screwdriver

Connect With Us!

Don't forget to like and comment on this video, and subscribe to our channel!
Рекомендации по теме
Комментарии
Автор

Where do I find the drip pan for the LG side by side. There is an dead person smell in the refrigerator that I can’t get rid of.

mariacamacho
Автор

Do you have a video on replacing a condenser fan housing, quite difficult on LG

BatesBattlesBases
Автор

Do you have any videos on replacing the drip pan under it?

twright
Автор

I have an LG fridge, model # LFX31925ST. Does my fridge have a condenser motor? I can't seem to find a part number.
Thanks.
JC

julianc
Автор

I replaced the cooling fan motor, and it starts to move and stops like if something was holding it but is free. I then get an error code and CF error code

cristinamvega
Автор

That second screw is brutal to get to if you have big hands.

nvjohansson
Автор

THE GRID CONDENSER PART IS NOT CONNECTED ON BACK

kmoo
Автор

Can you do a Vid for LG LMXS30776S ???? The condenser fan is on a bracket that sits tight behind two refrigerant tubes. I don't want to disturb or bend them and can't figger out how to get the darn housing out !! .All he service manual says is remove screws and then pops to a picture of the assembly out of the fridge!!! Not how to get it out.

KWKloeber
Автор

My neighbors are claiming because of the fan noise

abdessamedben
Автор

my fan works but makes a humming noise

newlookresurfacing
Автор

You can get the complete fan unit out with one screw. Less difficult 😉

ronaldvlug
welcome to shbcf.ru