Connect Your Wiring To Your Amp Like A PRO! | #shorts

Connect Your Wiring To Your Amp Like A PRO!

[PincheBeto_Bass]

Wire ferrules are extremely important! Love using them. Everyone always complains in the comments saying “why didn’t you crimp” when they don’t understand that the set screw basically crimps it for you

[lukegibson]

Interesting I’ve been a lineman for 6 years, I’ve never seen someone put a ferrule on without crimping it first! I understand you thinking that the screw will suffice with crimping to the wire but that is just not the case it needs to be crimped along the entire barrel before putting on heat shrink! Otherwise you will have a terrible connection or even worse that positive slips and shorts from line to ground and you need a new fuse!

[drvictoria]

Awesome. Can I use wire ferrules on amplifier input reducers?

[Art-ggdz]

Now what about those amps that use stupidly small insert holes for the wires? Or the ones that require the screw to be threaded through all the way?

[dclean-_-]

I always crimp the wire in the ferrule with the amp screw before shrinking the wrap down to make sure the screw doesn’t pull the ferrule out of the glue

[alextickle]

Damn, i just jam the wires into the terminals and snug em down

[subman]

Those are very interesting “wire strippers”… Almost looks exactly like “wire cutters “. 🧐

[taygwen]

I have a 2021 Mazda 6 with a factory Bose system. No one can seem to tell me how to get a sub and speakers in my car. I’m not a radio guy but three shops can’t get it right. What are they doing wrong. Please help

[globalans]

did this exact thing on my first install on my amp thank you

[JamieHPateJr]

Thats cool but i prefer the wire reducers imo

[Mr.Noz]

Always make sure it’s all the way back snug before heat shrinking

[dirtyboy]

Hey Thanks for The Info I’m a beginner on hooking up my own audio system in Truck I think how my wires hanging all out grounding out my connection bad I’ll have to get me some of them wire Farrell caps

[mitchellshriver]

car audio fabrication’s video on ferrules has done everybody a disservice. “set screw crimps” are useless, loose, and dangerous. don’t compromise your equipment- use ferrules as they were designed to be used and CRIMP. it’s so cheap nowadays.

[DeeHermanson]

Crazy i use that size for speaker wire

[tygoff]

You gotta have pro audio money to aquire these, most of the time first timers are just trying to get the loudest for the cheapest, so all the little extra accessories aren't important

[liltoxic]

You should always ground your amp before adding power

[layneholtz]

You don’t need a fat wire like that for your amp, use 14-16 gauge wire instead it can hold up to 30-50 amps.

[everesth]

What if i need to wire two wires to the same port ?

[theboyzfishingco]

Mine keep falling out but my wires don’t hang out my amp like that 😭 people just strip them back little much, .. and keep them twisted

[juanchips]

My amp stays on when car is off and I have everything connected right. My head unit is factory so I had to use a line converter to be able to connect the RCA cables but even with the remote wire connected it stays on😢