Headlight on Pit Bike install without any batteries

Showing how I installed a led light bar on my SSR 125 for cheap

Parts I used:

Look at this on eBay

Look at this on eBay

My bike: 2016 SSR 125
Gold bars
Pro Taper diamond grips
Red folding levers
Gold fuel filter
Gold gas cap
Custom led headlight kit
Red and white plastics
17t front sprocket
420x104 heavy duty chain
Black exhaust wrap
Fender Extender
Stiffer front suspension

[mywhatahampster]

Dude... you are the man!! Thank you so much for mentioning "yellow and white" at the 3 minute mark. I thought I was screwed since I didn't have 2 yellows. You are a gentlemen and a scholar sir.

[richardrobinson]

Been looking at videos to try and figure out how to do this. Never understood what to do until I just watched yours! Very well done! Thank you!

[rexthedragon]

You videos are different from other people normally it’s some 10 year old freaking out screaming and whining but you give out good information

[scottcooper]

Man, this is the first video that I’ve seen I’ve watched hundreds of them by now you simplified it on how to hook up the two yellow wires now my battery charges and I can get 12 V to the lights thank you sir. 🍻

[adamsquires]

Going through the comments there’s been a lot of people (mostly seems to be the 140cc motors from what I’m reading) that are having dimming issues with this set up. To get around this, I used the same wiring from the rectifier to wire in a 12v rc car battery, then simply run your power from the battery to your switch and lights. Definitely has been an awesome upgrade to have a headlight on my pit bike. Thank you for the simplification in this video. A lot of the reading I did online was vague and confusing until I saw you do it

[SwinginJohnson]

Damn good video sir!!
You just saved me a good amount of coin not having to buy the Blitzpro so thank you very much.

[picapica]

Update - some cheap regulators may fry the led's due to leaking spikes/transients, to avoid this, add a 12v battery as a buffer( any type e.g. SLA nimh nicd etc)

If this doesnt work for you(dim/no light)... try connecting only one of the wires to the regulator, and ground the other ac side on the regulator to the frame, at first i followed this tutorial but turned out wrong for some stators, (i chose white wire, a bit brighter than yellow), now easily powers a 55w halogen full brightness on idle, so in the end you should have the regulator connected to one wire and a spare left floating, for testing purposes skip the regulator and use a cheap disposable halogen bulb to check your stator. if you want to stop flicker, add a cap or better yet a battery

[pedrodegreatlazoro]

Top notch shed life hack fella ! Ps the led flicker and the shutter speed are out of synchronization thats the double slit effect and quantum physics right before your eyes

[trendymafia]

Edge if the earth :) still one of my favorites

[JimCamel]

i slapped a 18 inch light bar on my klx 140L for over a year now and its been working out great for me, i previously bought a light bar kit on ebay for dirtbikes but the LED light burnt out on the 2nd day, . so i kept the button, wiring, bracket assesmbly on and jus replaced the bar. it turns night into day i kid you not, i cant even drive near the main roads with out traffic flickering their high beams at me as if too say ITS TOO DAMN BRIGHT! i made my a bracket out of a old metal tv wallmount i had laying around and it fit perfectly

[ashtonbrisebois]

Best video even for 5 pin regulators I used this info on my 200cc 4 stroke Lifan

[steftacular]

Thanks so much for this vid! I'm trying to put a light on my CRF125

[jasongaudet]

Thanks for the vid, definitely going to use it for lightbar upgrade for my sons bike.

[mitchd]

Always wanted to do this now I know that's for the video and clear instructions 👌🏻

[deusxpuk]

That is the best diagram iv ever seen that’s ace man 😂

[leethompson]

Volumes is my fav band! definitely gonna try this on my bike tho

[itsstorm]

Great video very helpful I ordered a ssr it’s on it’s way right now I know I’ll need a light for it this is a very affordable way to have a light thanks for your help! :)

[threetoe]

Cheers mate, your directions were spot on, mines flashy at low revs. wont be idling much though chur

[johnnyfrantzen]

LOL LOL LOL😁 the same LED light bar as I have and my outdoor EL-WHEELCHAIR 😂😍🥳

[Falling_Down_D-FENS]

i did it exactly and it gets brighter as is revs up