Wall Panel Trim Guide | The Panel Company

In this video, our director Kyle goes through all of our trims. He explains all use cases, How to install them and how to cut them.

See our full range of products here:

You can shop all our PVC Trims here:

You can Shop all our ALUMINIUM trims here:

Silicone & Adhesives can be found here:

Socials:

Follow us on Facebook:

Follow us on Instagram:

[seanhall]

When the manager volunteers you to be the face of the company. This guy looks like i feel at work.

[polkadolt]

Question to The Panel Company and any experienced bathroom installation pros in the comment section!
! I have a shower over a bath. My 10mm depth panels will be coming down from the ceiling & meeting sone original 1950s tiles (white normal sized then narrow black ones at the top) that are above two sides of the bath, I love the tiles so don't want to remove.
The tiles are just UNDER 10mm depth and I guess with the panel adhesive the panel will be a couple of mms proud of the tiles.
What edging trim would you recommend for the bottom length of the cladding panel please?

[CptFriggerJizz]

About to do my bathroom and buying from you guys! Never put up panelling, and im not a great DIYer. So your videos have really helped, so thank you!

[scanfast]

Help with out of plum internal corners. Would I fit the trim to the board then to the wall ?

[maxiq]

Shower panels were not joined together properly. Very thin gap in middle of two. Is there anything I can do to stop it from lecking?Other than taking down the panels down and starting again.? Help!

[KdeB]

Hi mate, You said no to bother with Silicone as mould will appear over time, another guy from your company put silicone on while fuitting on another video??

[andrewbilcock]

When you use a internal corner trim the top trim doesnt cover the end if your only going half way up the wall, how is this finished normally?

[jd]

Brilliant, thank you. Will try mine with some of your instructions

[RC-oigg]

How would you finish a board against a shower enclosure wall mounted upright? Many thanks for the video 👍

[teegaffa]

How would you secure the trims to ceramic tiles if I was to adhesive direct onto tiles in a bathroom

[galaxy]

Good video thanks, but you didn't say the different between 5mm and 10mm trim

[catallen]

How do you make a meat finish where 2 ends meet? For example the horizontal and vertical corners

[paulbrady]

Hi the h trim on joining together on the roof i see it goes underneath but how do you join the panels side by side and then fit under the h panel ?

[johnbyers]

Hi, great vid! I’m going to be cladding my ceiling very soon but I’m not sure the best way to finish the edges. Would you recommend coving, the retro fit or end caps?

[northeastfishermanuk]

Hi mate so am doing my bathroom first time ever to do this can you give me some useful starting tip and would you do the ceiling first before the walls thanks

[czeital]

useful info. what is the correct trim to use ( if any ) where a panel comes off / meets the edge of a bath please ? Thank you

[andyhaigh]

Hi guys.
Which trim would you recommend I use for an internal corner that's incorporating the ceiling?
Is there a trim that would let me slide in the panels like 3 way, two walls and a ceiling or would I need to mitre the corner in?
Many thanks

[asef]

Hi, Is there a special trim to finish the last internal corner off? I'm about to purchase materials to do my bathroom but unsure how I would fit the last panel as the trim would already be in place

[monicaknight]

I am planning on cladding the kitchen walls; no wall cupboards just base units - I was going to use the end trim on top of the granite worktop but having watched the video I understand that this may not be such a good idea - would you recommend a different trim or clear silicone sealant?

[farhatqureshi]

Can you explain how the external corner trim is actually used . The trim Can't be screwed to the corner and will it be strong enough with silicone alone? Thanks.