Reserve Wheels Fillmore Valve Installation

Clay shows us how easy it is to install the all new Fillmore Valve from Reserve Wheels.

[djl]

Is it possible to still use Stan's 2 oz sealant bottles to add sealant with just the bottle?

[AOL]

So do you attach the pump to the valve the normal way and the without tightening the little valve nut, just put the top cap over it?

[shtzweak]

Oh no way, Mike’s bikes Los Gatos is my go to Mike’s bikes 😆

[wendellotanael]

what kind of air pump shraeder? presta?

[Djpedla]

Just fitted these to my Reserve 30's. Not a chance they will inflate with my track pump. Running Maxxis Minions. What am I'm doing wrong>

[jp]

How do you fill sealant through the valve? The sealant syringe tube is sized for the current presta system with the valve core removed so it’s too large to share space with Fillmore’s unremovable metal pin.

[lmendz]

FYI I tried this product on Enve M735 wheel, it was too short and didn't fit. this is rated 18-28mm rim depth and envy M7 models is already at 27mm plus the rim strip.

[locoshaggy]

There is nothing better than presta! clogging of the valve can be removed by putting a little solid vaseline inside the ovule of the valve that opens and closes. This prevents the sealant from sticking. Even to clean it, you can file the riveted top of the mini presta nut and disassemble it into 3 parts, clean it with thinner and apply Vaseline and you will never have a problem of it clogging again. The presta valve has no competition doing this, it has good flow, it does not clog and the tip is removable to add sealant.