How to bypass a ignition switch

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

There is a much easier way to fix this its a common issue, the ignitin cylinder travels wgen u turn key foward to start it wears out . The fix is to take lock cylinder out of igition and the little block that stops the key from going any farther foward must be shaved down so u can go a little more f I ward to make contact

vdittycc
Автор

How do I bypass a 98 lincoln town car??

bigglokk
Автор

My car wont star after driving and the fuis box get hot so i have to wait for a wile to star i cahbge the fuise box still duing the same

sonyavaldez
Автор

That must be a battery. A multimeter isn't going to discharge voltage.

jdkimble
Автор

How do I bypass stearing lock 1997 e450

djdiako
Автор

why cant you do it direct.from.the ign switc

squirrelly_analytics
Автор

I recently by passed my ignition switch and hooked up a push button. Ran fine for a week and came back out and I hooked it back up and tried to start it but my car has no power at all now. My car charger work, head lights, back light but nothing on the dash comes up when I have the car in run. Do you think it’s my jcase fuse is blown?

Ffihxubv
Автор

Fude i
Fords are like a ridding lawn mower, you have to sit on yje seat b4 it starts.

tomwalker
Автор

If your security light is on it won't work

heavyme
Автор

Which relay was that you added voltage to? What spot was it?

richmontana
Автор

Mine cranks but wont turn over when i send power to starter. Good battery and alternator. Grounds and fuses checked. My dash lights up but wont show guages/warning lights so i think my switch is also bad

xXSwaggie
Автор

What is that tool called looming for one.

MrGassman
Автор

Mine doing that how do you start the motor without a meter

patriciawilliams
Автор

Wow ! This was how /why my vehicle wouldn't Turn Over !! So technical. . Could you run 2gauge wire from the (dead solenoid ) then connect the wire too (accessory) 12v like cig. Lighter or dome light & then creating a circuit bypass ? With the turn key present to unlock the wheel & turn on acc. ..

teddybear
Автор

That's bypassing the starter relay because if the ignition switch was bad it would not start. You are removing the starter relay to start it

anthonyhardy
Автор

What tool is it called that started your engine through the voltage on the ignition chip? Whats it called bro? If you don’t mind

ShitILikeMFs