Quick Covers Ford F-150 Rocker Installation | Quick Covers by OAM

Показать описание

Frequently Asked Questions:

- How are Quick Covers installed?
Quick Covers are installed with a combination of automotive-grade adhesive tape and fasteners.

- What are Quick Covers made out of?
Quick Covers are formed from a very durable thermoplastic. Similar to the material used on OEM wheel flares and moldings.

- Can I install them myself?
Yes. Quick Covers can be installed easily, but professional installation is strongly recommended.

- Where can I get Quick Covers installed?
Search Here for an installer near you.

- Can't find an installer near you?
Ask your local body shops to reach out to us.

- Do Quick Covers come painted?
No. Quick Covers are delivered in raw plastic form at this time.

- Is professional painting required?
No. However, because Quick Covers are delivered in raw plastic form, they must be primed with a very specific product. Use of any other primer will result in adhesion issues resulting in paint cracks/peeling. For this reason, professional painting is strongly recommended.

- Should Quick Covers be scuffed or sanded before being primed?
No. Quick Covers are intended to be coated with a specialty raw plastic primer, which is intended to be applied directly onto the smooth plastic surface. It offers excellent adhesion and flex properties.

- What primer should be used on Quick Covers products?
Quick Covers are delivered in raw plastic form, so a raw plastic-compatible primer must be used. We recommend Polyvance Bumper & Cladding Coat – Adhesion Primer. Part No. 3611-1

- What should be used as a rust inhibitor?
We recommend brushing a high-viscosity grease on any areas that can be reached by hand. For hard-to-reach areas (i.e. inside of rocker panels and cab corners) we recommend using the aerosol rust inhibitor Like90.

Рекомендации по теме

Комментарии

Wished they made them for pre2000 trucks. They would kill it here in the east

jackofalltrades

What rocker panel? Mine is already rusted away!

jeffbrown

My ford Expedition 2007 has the same problem, rusted running boards. This seems like a good fix.

Hamza_Aziz

I know you make stuff for trucks. But could I possibly have one specially made for an 06 fusion? But in the same format as the f150 in the video

isaiaheckert

These look like they could tear or get a hole in it with anything. Whats this made of a tampon?

dennisreynolds

How about before after pictures, this kits run about $300-$400 😲

rasmo

Leaving the plastic sill plate underneath was a nice touch. Aren’t they just taped on?

cobburn

The video would have been better if it started from the beginning with the prep. Removal of the running boards etc.

mandyca

Rockers on my 04 are still solid, don't know why, truck's been through 17 salty winters.

christinewoodruff

Hello, where can I find that plastic kit?

josegranados

does this require the rocker underneath to be fully intact? I have some rust holes that I want to cut out, not very much, about the size of a quarter, to prevent the rust from spreading. I'll likely spray the inside with some form of rustoleum. Then slide these over for a clean look. 2010 f150, extended cab.

zeal

I'm looking to get a quick cover for my 2004 Ford f150 supercrew let me know where to get if and if its available in black color

suelguseinov

I have a 2002 Harley Davidson f150 would like a set

DukeMitchell.

Is this available for a 2012 ram 1500 quad cab? Thanks

misrainmikegarciarosariojr

I own a 2010 Lariat and it's well maintained and washed. The interior has been covered since the first week I bought it new. Needless to say I'm sick seeing the rot on the drivers rocker. Seems like a cheap fix and unload it.

raymonddeneen