IoT Based Patient Health Monitoring System using ESP8266 & Arduino

With tons of new healthcare technology start-ups, IoT is rapidly revolutionizing the healthcare industry. In this project we have designed IoT Based Patient Health Monitoring System using ESP8266 & Arduino. The IoT platform used in this project is ThingSpeak. ThingSpeak is an open source Internet of Things (IoT) application and API to store and retrieve data from things using the HTTP protocol over the Internet or via a Local Area Network. This IoT device could read pulse rate and measure surrounding temperature. It continuously monitors the pulse rate and surrounding temperature and updates them to an IoT platform.

The Arduino Sketch running over the device implements the various functionalities of the project like reading sensor data, converting them into strings, passing them to the IoT platform and displaying measured pulse rate and temperature on character LCD.

Drop a like if you liked this video.
Don't forget to subscribe our channel for more Electronics project and tutorials.

[vinayabhat]

Amazing video, good explanation, thank you !

[eliendayambaje]

Congulation!! that your project is very good

[shreyasoni]

Sir can you please tell how to connect each and every thing step by step

[jericobolado]

Good Project I have a few question how to fix problem about void esp8266

[victoryacquiredinthesis]

Sir, is Oximeter sensor MAX30100 will work at ThingSpeak? Hope you would notice this, thanks!

[khairinnadhirah]

Hye sir, can the thingspeak save the data for the particular day/patient that we can look again as history?

[chintanmeher]

We are not able to see information on a lcd display. Please suggest us what to do

[kshitigaddigoudar]

Sir can we use a ECG sensor instead of pulse rate sensor? Your reply would be greatly appreciated

[ferencakosjambor]

Have to add an ecg module(ad8232) please help and arduino is requed for connect to pc

[wali]

Amazing project sir, what if you want to also add the heart rate sensor to this project, how will I go about it. Your reply will be greatly appreciated

[deveshvinodsharma]

what are the dependncies of this device

[sumengeorge]

when i add the library file the programme shows the uploading error

[FajarMR]

Can u help me, i have a IoT project for Water Quality Control in Aquaculture and i want to check the water quality in Thinkspeak, so how to connect the sensor arduino to thinkspeak? Please help me. This is project for my homework in school.

[uppulavandana]

The data is not displayed in lcd and thingspeak what may be the problem? Could you please tell.

[mominkhan]

TCCR2A was not declare in this scope . i can not run

[johnsonokoli]

Please I'm getting this error from the oximeter and I soldered it properly with the right pin connections. "Initialization pulse oximeter... FAILED"
Please any solution?

[anuragmohanty]

I want to have a conversation with u about this project....can u tell me how we can talk about it?

[velichetimaidhile]

Hi sir
Iam unable to do this one
We are not getting data on lcd and even in thinkspeak

[beetbharshalsanap]

sir, i want to do this project with the help of ATMEGA8 not arduino, can you help with that

[joyceyik]

Good project, I like it . Thanks for sharing :)