DIY Porch Welcome Stand ~ Woodworking Projects That Sell!

Follow along and build your own porch welcome stand. This will certainly impress your neighbors, it did mine!
#hangingbasket #hangingbasketplant #woodworkingprojects

Use appropriate protective gear and follow all safety procedures.
As an Amazon Associate, I earn from qualifying purchases.
The following links are Amazon affiliate links:

Cut List:
4 legs (2x4's) - 38"
2 bottom Leg Assembly pieces, upper (2x4's) - 8-1/2" long point to long point 45 degree cut ends
2 bottom Leg Assembly pieces lower (2x4's)- 11-1/2" long point to long point 45 degree cut ends
2 bottom stretchers (1-1/2x1-1/2" square x 26" long)
1 sign shelf (2x6)- 26" long
4 feet (2x4's)- 4-1/2" long with inside bottom corner beveled at 45 degrees
2 Spacer blocks- 2-1/2" long
1 top (2x6)- 35" long with bottom corner of ends cut at 45 degrees
Sign board is from a 1x8 board which is actually 7-1/4" high, 32" long, 3/4" thick
board rail (2) 3/4x3/4" by 32" long

Pick up my app:

[ubwoodman]

Nice! If you spray the sign with a matte finish of any type then do your stencil it will eliminate the bleed.

[jamainwallen]

Thank you, I just finished making mine and love it!!!

[billcooke]

these are great, made one for the wife and a friend now I have 15 more to make.

[TheWoodshedbyDan]

My wife found this project for me to build for her. Now I'm subbed to your channel and looking forward to more videos.

[suzukirocket]

Very nice! I'm sure my wife would like one! I think one thing I would add would be some adjustable feet to the bottom just because not everyone has perfectly flat porches/decks and would prevent wobbling! Maybe even extend the bottom boards of the base a couple inches on each side to give more stability if windy!

[stefanformgren]

I like the SLIDE function, easy to change the text matching the "party/holiday" :)

[johnmartinmagic]

Just made one for our house. Thanks for sharing the plans 😊

[Salty_Knuckles]

Great project. I’ve been collecting woodworking projects on YouTube for months and looking for the perfect one to get me off the couch, this was it! It was easy to build and drove me to buy a couple of tools that I wanted, Kreg jig, 90 degree adapter and a long clamp. Now onto stain, planter, hardware and stencils. Hey everyone, do this project, it’s fun and easy once you get started.

[brianmurphy]

The planter is finished, we made extra sign boards for a few holidays or occasions. The planter came out great thanks to the great plans and video. We gave it to my sister in law as a gift and she got all watery eyed. I wish I could post a photo of the finished stand. Thanks Ronnie for the great plan, video, and motivation.

[eltee]

This one is definitely going on my to do list. In fact, I might push it to the top. Thank you again for a great video.

[Jkcreswell]

This is THE MOST BEAUTIFUL PLANT STAND! Especially the night shot! WOW! Definitely will have to set aside time to try and build this! Thank you!!!

[gsilcoful]

I have used a light coat of clear, like what you used on the entire project, over the stencil first and then the color. The clear will blead through but you wont see it and it will seal the stencil and help the bleading of the color coat. Worth a try.

[shauldvosis]

Hey Ronnie!… Great video. Thank you for sharing. A little tip for you… Next time you’re stenciling, if you get bleedthrough. A sharp utility blade or a razor blade can be used as a mini scraper. It’s fine enough so you can do detailed work and it will take it right off.

[eddiehinson]

Thanks Ronnie, this is my next project for my wife and daughters. I just got through with a porch swing bed for our youngest daughter for her birthday, that was a week
Great idea, thanks

[grandaygain]

I built a different version of this in the past for a client. I used washers and round earth magnets to hold the interchangablw signs in. I like the your
channel design better. This is a very good design and build. Thanks!

[larrystone]

Great job and project thx for sharing enjoyed it

[Braedenfish]

Gonna make! Love it but prob longer feet. Grandkids😂

[georgeedwards]

Looks great! I did one similar to this but painted one of the inserts with chalkboard paint so the could write their own sayings

[matthewjason]

Nice job explaining. And thanks for the plans and cut list

[StephenWebstershire]

Great video, I wish that I had a bigger woodshop to work in. I do a lot of crafts. Love it!