FINALLY! A QUICK RELEASE ROOF TOP TENT MOUNTING SYSTEM!

preview_player
Показать описание
The Front Runner Quick Release Tent Mount kit allows Roof Top Tent owners to remove their tent from their vehicle in seconds without any tools.

Need your daily driver back? Don't fit in your garage? Save precious sweat, tears and time. Quickly and easily remove your Roof Top Tent without tools.

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or mount a roof top tent. Just release the tabs on the 4 latches and in seconds, lift the tent away. 

No more wrenching in tight spaces during the “off-season” or weekday removal of a roof top tent.

Currently compatible with the Front Runner Roof Top Tent - by Front Runner (TENT031) and all Autohome / Maggionlina tents.

This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.

Tents can be mounted at 2 different heights, depending on clearance needs. The bottom of the tent can sit either 40mm or 17mm above the rack slats. Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. Fitting instructions are included. 

4 low profile base brackets are bolted to a Front Runner Rack and 4 self-aligning bushes are secured to the the tent base channels using the supplied plates.

The brackets latching system feature a safety catch.

No tent modification required.

Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes. 

Supplied with all required mounting hardware and a special installation tool.

Get yours here:

__________________________________________________________________

ROAM WITH US

Subscribe to YouTube
Twitter: goFrontRunner
#FrontRunnerOutfitters
#FrontRunner
#BornToRoam

WE’RE HERE FOR YOU. CONTACT SUPPORT:

Phone: 866-840-0321

__________________________________________________________________

Works with any vehicle with a Slimline II roof rack, including:

JEEP
Wrangler JKU, Grand Cherokee, Patriot, Liberty, Renegade

TOYOTA
Tacoma, Tundra, 4Runner, FJ, Land Cruiser, Highlander, Hilux, RAV4, Sequoia, Sienna, Kluger, Prius

LAND ROVER
Defender 110, Defender 90, LR3, LR4, Range Rover, Discovery, Freelander, Evoque,

MERCEDES-BENZ
G-Wagon, CLS, E Series, GL, GLK, ML, R Class, Sprinter

SUBARU
Crosstrek, Forester, Impreza, Outback, Tribeca, WRX, XV

CHEVROLET
Captiva, Cheyenne, Colorado, Equinox, Express, Silverado, Suburban, Tahoe, Trailblazer, Traverse, Trax

BMW
3 Series, X Series

BUICK
Enclave, Encore

CADILLAC
Escalade, CTS, SRX, XTS
CHRYSLER
Town & Country

DODGE
Durango, Grand Caravan, RAM

FORD
E, F-Series, Escape, Ranger, Expedition, Explorer, Bronco

GMC
Canyon, Savana, Sierra, Yukon

HONDA
CRV, Odyssey, Pilot, Ridgeline

HYUNDAI
H1, Santa Fe, Terracan, Tuscon

INFINITI
EX, FX, QX

LEXUS
GX, LX, RX

LINCOLN
Navigator, Mark, MKT, MKX

MINI
Cooper

MITSUBISHI
ASX, Montero, Outlander, Pajero, Strada, Titon

NISSAN
Frontier, Armada, Juke, Navara, NV, Pathfinder, Rogue, Titan, XTerra

SCION
XB

SUZUKI
Jimny, Grand Vitara, S-Cross

VOLKSWAGEN
Amarok, Caddy, Crafter, Golf, Jetta, Routan, Saveiro, T5, Tiguan, Touareg, Transporter

VOLVO
V60, XC

Don’t see your vehicle on the list? Contact us, we can always find a solution for you.
Рекомендации по теме
Комментарии
Автор

Loved Your competition and in particular the human voice failure in calling the bank :-)

jarlaspunvik
Автор

Just here for Frankie... (c) when those gonna be available? we need 2 sets here in Dubai asap))

garage.ndeniskumanin
Автор

i settup a hoist in my garage so i back up, connect my entire bed rack, lift it all as one unit and i have my bed free again
if recomend a similar settup for anyone who uses their truck as a daily driver and overlander

kaomatic
Автор

Will these work on a Rhino Rack Pioneer Platform?

byronlee
Автор

What type of lock (security) do they have? Getting stolen, is definitely high these days. What type of security do these have, in preventing that?

joshuabingham
Автор

I'm interested in both your rack and roof top tent.  Is the Toyota a long or short bed?  Thanks

ralphkeith
Автор

If it's quick and easy for me, it's quick and easy for thieves. Any suggestions on how I could add a quick locking mechanism?

canyonoverland
Автор

Could you please tell me what is the difference between the quick release systems TBMK008 and TBMK011? To me both look the same!?

oscarmike
Автор

Just got a No Boundaries 10.6 Rv an have Rhino rack that came mounted on the roof. Was wondering if these brackets would work to mount my CVT tent to my Rv. Thank you Rhino said could drill holes but since is new an under warranty I do not want to do.

DWATSON
Автор

Entertaining lol. 😅 thanks for the info

Kimbalooie
Автор

Hi there, if I mount these quick release mounts from underneath the rack to get a low profile, is there enough room to put my hand in to lock/unlock the tent?

K_H-Channel
Автор

Would it be possible to weld the base mounts to my metal tube rack and then mount the other piece to my channels on a MIA aluminum clam shell tent? I need a quick release system and want to use yours. Thanks

flavrdPnut
Автор

will these work with ikamper and can the mounts be mounted 90-dgress from shown (e.g. insert tent left to right instead of forward

LivingSmallLivingMobile
Автор

would the frontrunner ikamper quick release mount work with an uptop overland roof rack? I would love to purchase this if compatible.

danielchoi
Автор

Is the quick release mount able to be used on other branded roof racks, e.g. ARB? Looking to install these on an ARB rack with some mount adaptors they have.

georgesotiropoulos_
Автор

Can I use the TBMK012 to mount my Roofnest Falcon to FR Slimline II rack?

renepenalosa
Автор

Are these compatible with a Tuff Stuff Alpha? The tent uses square head bolts in rails to mount to the u bracket.

marcochavane
Автор

Would be awesome if you could come up with a similar system for removing the roof rack itself! Would save lots of fuel when not using the roof rack, and save the wallet as well as the planet! :D

asmundke
Автор

Do you sell just the tent mounting channels to install on my current tent? Or will the mount fit in my MIA hard shell tent channels? Thanks

flavrdPnut
Автор

Is there a way to add a lock or something to add security?

byronlee
welcome to shbcf.ru