How To Refill A Hp Colour Ink Cartridge Hp 62 302 Hp62 Hp302 61 62xl 65 63 680 304 304xl 303 303xl

Avery useful video to show you how to refill your ink cartridge like a professional.

***Please find the refill kit here ***
***How Did we record this video?***
To buy very affordable recording equipment please click below.
***Need a new Hp printer?? Click Below***

[OctoLumia]

these videos are absolutely game changing thank you so much, you've got a new subscriber !!! one little question, is this video working for 305, because i dont see it in the title, but it's the same type of cartridge as the one in the black cartridge refill video ?

[mslakersrocks]

These videos helped me save money that was wasted on buying expensive new cartridges. Thank you!

[ecousubapa]

for the colored one, is better to check it before filling for the fist time, because the colors can be arrange differently and that would spoil the sponge inside. use a toothpick or smth.

[farelimm]

Hello from the Southeastern US! I successfully refilled mine :) Currently using an HP Envy 4520. I had to cover specific contacts on the cartridges to trick my printer, which was a breeze. I also had to do several cleaning tests and alignments. Now I can print business flyers and invoices at home! We are projected to save roughly $500 on ink over the next several years--can't thank you guys enough!!!

[kirkmcintyre]

I've watched twice and didn't get how much ink goes to use. You say "we know how much ink goes in" but you never told us. Thanks for making me have to watch someone else's video to learn what I thought I was going to learn here. One of the only things we couldn't have figured out on our own.

[mieeim]

Ordered, received, refilled, done!
Thank you!

[tigerlilly]

I have an Envy 7640 with 62 cartridge and this works for me but may not work for you but if you follow any of this advice you do so at your own risk:

First refill one cartridge and put into machine and then do the next so the head of the cartridges do not dry out as you're doing this. If you get a scratchy copy that might mean you have to clean the cartridge head. I do this by taking a small plate, putting just a bit of hot water in in and letting the head of the cartridge sit in the water for about 5 minutes. Then I gently pat dry the clean the cartridge with a soft wipe and wipe the pins with a q tip... be careful not to damage the pins.

Also look at where you install your cartridge and clean that area thoroughly. I bought sponge sticks which work well to soak up any ink residue in the cartridge chamber (including the sponges in them) but again I gently wipe the pins inside the printer cartridge area with a q tips.

After the ink is added gently clean the entire cartridge with a wipe and use q tips to clean off the pins in the front. If when you gently wipe the cartridge head you don't see ink, use the apparatus that holds the cartridge and a syringe underneath to draw out the ink through the printhead. If there's no ink take a plate and fill just a bit with hot water and let the cartridge head soak for about 5 minutes... Don't get the entire cartridge wet, just the cartridge head. Then try again... If color you should see small streaks bit blue, magenta and yellow in the water and on your wipes... and for black you'll see black.

If you want to try to tape the pin on each cartridge to over-ride the error code -- you must do this very gently and carefully, there is a chance if you don't you can scratch the pins, you could also pull the pins right off the cartridge so you'll have to do this at your own risk (I do and I've not have a problem)
Turn the pin head towards you and looking at the pin head:
- For color tape the very bottom pin on the bottom right
- For black tape the middle pin on the very top

How I tape: Without gloves cut a piece of tape into about a 1/2" rectangle... Then cut that into an angle like a long triangle -- have a wider side and then a narrow side just wide enough to cover the pin. Next on the very clean cartridge very carefully cover the pin gently but and then firmly push the tail of the tape onto the plastic... You need a tail in case you have to remove the tape plus if it gets loose you can hopefully grab it gently with a tweezers.

After that take a small (but not sharp) object, I use a tiny crochet hook -- press down on the reset button of each cartridge, these are on top of the cartridge and are round with a slight depression. Press down for 12-15 seconds and put back into cartridge holder.

This works for me but I cannot guarantee and you should be aware if you use the tape you run the risk of pulling off the pin which I can't guarantee you won't, but if you don't want to do the tape then you might want to try pressing down on the reset button(s) for at least 12 to 15 seconds... hope it works for you :)



Reply

[smirk]

This video was scary but refreshing. Scary because I hate needles but the guy was smooth and steady refilling cartridge. Good job

[deedee_]

ive been out of ink for about 3yrs or so the cartridges are too expensive thnk u sooo very much i can now get the kit and save a bunch of money

[geronimo]

this feels like unmasking black magic. love it and shared it

[deedee_]

woooow now i can be a phlebotomist thnx man and it only took me 7min of watchn your video to get my degree lol ur amazing and very gentle looks like a dentist etc ur vids

[leonardpoulin]

Excellent detail. Never saw that priming widget before. I'll have to get one for the stubborn ink cartridges when the printer has been idle too long. I didn't want to watch at first, because 7 1/2 minutes is long for me. I'm glad I took the time. Thanks.

[mweb]

Interesting. Educational. Fascinating. Money-saving. Well done!!!

[Rustyspoonssssss]

Cheers for the video, after spending 1000s on ink cartridges im glad i can now refill myself x

[katsu]

The holes you made in the bottom sticker with the needle don't have to be closed ? (sorry for my english if it's not perfect, i'm french). Thanks for your video.

[Nigel_S]

just followed this, it worked a treat...

[strxwberry]

Mate you just made some cartridges manufacturers extremely angry. LoL
Keep up the good work and keep empowering us the general public.

I'll order them from you just to help you guys out.

Thank you again

[jofziwb]

Is it standard where the color holes are located on HP cartridges?
- Magenta top,
- Cyan right
- Yellow left ??

[daveg]

Thanks for the video, I have not used my printer for a long time and think that the sponges inside must be totally dried up now and thats why I only got Cyan showing when i used this method.
I really need to start printing off all the photos that i have of the grand children, so have started the HP instant ink trial and will cancel after a couple of months, buy another kit from yourselves and try filing again

[laus]

if I don't need to refill my cartridges often, would the syringe and needle clog up /dry in between refills, or is there a way to clean them, like with some household solvent ?