I BUILT THE ULTIMATE XBOX TO CELEBRATE ITS 20th ANNIVERSARY | MakeMHz HDMI + SSD + OpenXenium +MORE!

I BUILT THE ULTIMATE XBOX TO CELEBRATE ITS 20th ANNIVERSARY | MakeMHz HDMI + SSD + OpenXenium +MORE!

In today’s episode of Retro Renew, I celebrated the XBOX’s 20th Anniversary by building my own Ultimate OG XBOX! I go all out and upgrade the Harddrive to a SSD, replace the fan with an ulta silent one, install the OpenXensium Mod Chip and most importantly, I install the amazing MakeMHz HD+ HDMI mod! This is truly the ultimate Xbox worthy of the amazing 20 years it’s been with us!

// Support Macho Nacho:

► So here's what you will find in this video:
► 0:00 Intro
► 2:46 Parts Overview
► 5:15 Ultimate XBOX Build Tutorial
► 19:34 Features Overview
► 21:13 Pros and Cons
► 23:25 Final Thoughts/Conclusion
-----

// Products Featured in This Video (Affiliate Links Below):
-----

//Redherring32
-----

// SAVE MONEY at these Retro Modding Stores! (Affiliate Links Below):

// TOOLS AND GEAR I Use For Video Game Console Modding (Soldering Equipment, Flux, Kapton Tape etc) (Affiliate Link):
-----

// MY VIDEO and AUDIO Equipment (Amazon Affiliate Links):
-----

// These stores provide fantastic Gear and Mods for Retro Consoles! If you use the following links below, I received a small percentage from sales at no cost to you. This is a great, free way to support the channel!

○ Retro Game Repair Shor (Tons of Game Boy Mods)

○ Retro Modding (Lots of Handheld Console Mods)

○ Stone Age Gamer (Flash Carts and other great Retro Tech)

○ eBay (Second Hand Retro Gaming Gear and More. It’s where I buy a lot of the consoles I mod!)

○ Sendico (Proxy Service to bid on Japanese Auctions. I use Sendico to get great deals on Retro Consoles directly from Japan!)
-----

// Social Media
-----

// Intro Music for Retro Renew Series by Matthew McCheskey:
-----
DISCLAIMER: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.

Full disclosure, I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!

#Xbox20 #MakeMhz #MachoNachoProductions

[Cinderkin]

I've got 3 of these bad boys lying around (was big into Halo lan parties) I didn't even know they had an HDMI mod kit! After getting My N64 modded with HDMI I'm so modding my Xboxes.

[bllygot]

I worked at a used game store that did console repairs. One day corporate called and told me to throw away our parts system over stock. I called my mom and loaded up some 30 broken xboxes in her minivan. By the time I was off work she had already tought herself how to mod one.

I put myself through a year of college by s3lling pot and modding and selling xboxes

[ProlMLGJoe]

Imagine being an OG Xbox player who time travelled to 2023, you'd be like "holy shit, this is what an Xbox looks like?". Though you'd be disappointed with how gaming is nowadays.

[Absolucy]

Tip: you can avoid scraping the heatsinks entirely by spraying Goo-Gone onto the black thermal compound and letting it sit for a few minutes, then a q-tip/cotton pad should get it right off!
Also, a normal hair dryer can heat the GPU heatsink enough for it to come off.

[BashoStrikes]

A year ago I picked up a pristine OG Xbox - I changed out the fan and caps, soft modded it and installed a couple multi-terrabyte hard drives and installed the entire North American original library. Gtg.

[breakinglegsandbreakinghea]

Seriously some beautiful soldering there. Damn.

[MegaManNeo]

The fact that the XBOX is so simple to mod makes it even more fun I suppose.
Maybe I'll buy one eventually, pre modded.

[nubatman]

This is by far more than I will do to my systems. I did the softmod approach with a sata drive replacement years ago. Took it a step further and slimmed the casing down. Then went an additional route of removing the disc drive minus its motherboard.

At the time SSD was impractical for the mod based on cost. And I feel the HDMI out would bring my system more play time (haven't used mine in 4 years).

Excellent job as usual Tito.

[nccm]

One more tip: If you haven't done so yet, make sure to also remove the clock capacitor and clean up any spilled capacitor leakage.

[SaarN]

Love seeing how love is still given to the console of my childhood.
Much respect to the SNES, PS1 and PS2, but.. the splash screen of Halo 1 can make me shed a tear

[redherring]

Excellent video!
Also this Redherring32 guy sounds like a real piece of work, but I'm sure he was happy to help.

[Hyokkuda]

This is literally the best soldering skills I have ever seen in a video. It's so tiny and accurate! You are really something else! I have often seen professionals doing a "blob" nasty job. It just hurts to watch, while yours is just satisfying! I could watch you do that for an hour. :P

[AaronParkerFTW]

Great project. Modding the OG Xbox is a lot of fun and there is still a pretty active community doing it even today

[efrempannell]

As a Day one OG Xbox owner, to see those mods look super easy compared to the 20+ soldering job done to one of the OG xbox in my collection. Time to find a 1.6 and get to modding!!!

[juliomauro_]

Forza was just amazing! Thanks for sharing this project.

[madcat]

This was fun to watch.

You can really see the big temperature difference with the new thermalpaste (and fan).

Still wish we got OG Xboxes where I live. 😑

[BretMix]

I know this is two years old, but i just had to comment... What a well-put-together, easy to understand piece of information it is! Production is also top-notch. I've seen some videos like this before, but this one absolutely takes the crown. Subbed!

[HSchristian]

Despite the fact I COULD NEVER be able to do this to my Xbox, I watched the whole video and simply loved it
Just wow 💚

[boxman]

Your production value is INSANE. You honestly deserve more views. Well done.

[Macraig_]

Love watching this kind of stuff! Never in a million years attempting it though 😂