SEQURE S99 The Best Portable Soldering Iron

SQ001 no longer available

These portable soldering irons are getting really good!!

#soldering #solderingiron #solderingstation

Help support the channel by clicking on some of these links :)
Making a purchase helps even more!!!

Check out my Amazon storefront :)

The stuff I use :

Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX FPV Receiver

Ovonic 4S Lipo Battery120C 1600mAh 14.8V Lipo Battery

CNHL 4S Lipo Battery 1500mAh 14.8V lipo Battery 100C with XT60

DroneMask FPV any Drone

PNY 32GB Elite Class 10 U1 microSDHC Flash Memory Card 5-Pack - 100MB/s, Class 10, U1, Full HD, UHS-I, Micro SD

wire cutters

Beitian Dual BN-220 GPS

HGLRC M80 GPS Module

Panasonic FM Series Capacitors - 35V 1000uf Ultra Low ESR

Radiomater Boxer ELRS Transmitter

RadioMaster Zorro Controller 2.4GHz 16CH Hall Sensor Gimbals OpenTX/EdgeTX System Radio Transmitter (ELRS w/Batteries)

multi color versions

RadioMaster TX12 MKII 2.4GHz 16 Channel EdgeTX OpenTX Compact Radio Controller Mode 2 (ELRS)

2.4G 2W 2000mW Mini Radio Signal Booster Amplifier Module Compatible for DJI Phantom RC Transmitter FPV Extend Range

Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX)

Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP2RX)

Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter

music by
tubebackr Bullet Train No Copyright Background Music

[swissfreek]

Good review. I have an older AliExpress version of this iron. It’s OK but build quality is meh and it didn’t come with any of the accessories. Figured it was only a matter of time before Sequre or Sainsmart or similar made an iron to take C245 tips, so I’ll def be picking this up. Hopefully they can get IronOS to work on this as well.

Being able to use C245 tips means you can get just about any tip shape/size imaginable from JBC. They’re not cheap but they are fantastic quality. As good as it worked in your video, if you had a 5mm chisel or something like that, it would have melted those ESC pads just about instantly, even at 300° C.

These irons are so good these days I’ve gotten rid of my Hakko solder stations. I just use this for everything. Fantastic.

[gdhall]

Very nice review Pete. I bought one similar to this one about two years ago, I only used it once.

[Boz]

As you rub it on the board i can see the tip wobbling in the iron

[johncarold]

Hey Pete, This just figured, I just purchased a new soldering iron, a SEQUIRE SQ001, and as much as I like it, the S99 with the case looks great. I also like how you can go to 500c with mine I can only go up to 450c, I also like the LED cable and power supply, I see that the SQ001 you show that it's disconnected, that figures ! But it's still widely sold. Thanks for the video and information about these soldering irons

[emmettturner]

I ordered mine a couple days ago. I sure hope it isn’t missing g the XT60 cable since including one was half the reason I settled on this iron.

[electroddxful]

Great review as always Pete. I have something like that and it works well 🙏👍🙏👍

[ChaddyFPV]

What is the minimum watts to use in a Flight Controller with XT 60 connector wire and the motor wires?