2006 Toyota Tacoma secondary air injection - Part 4 of 5

Secondary air injection system of a 2006 Toyota Tacoma 2.7 liter truck. Code numbers p0418 and p2445. A complete removal and disassembly of the parts.

I'll apologize now for the haphazard video, the repetitiveness,
over talking, calling a 6mm nut a number 6 nut, & I'm sure several other things but I was working & filming as I went along.

I started this video after I began the repair so things are a little out of order, but I hope you will learn a bit about what's going on.

There are 5 parts to this about 7 minutes each, I will post the links below.

[tommystryker]

Check this out guys! Before taking anything out test your air pumps. Bypass the power by running some wire directly to the battery. Listen to the pump when you power it, if it sounds clear and clean you are good. If it sounds sick, you may need to replace them. Next, take your diverter valves off and take them apart just like in the video. I cleaned mine with a toothbrush and gas. All but the plastic part, just the metal moving part. Remember how you took it apart and put it back just the same.... This was the fix for me. Saved myself $2300. That is what the dealership wanted to charge me just for the diverter valves. I asked them how much for just the parts? $2000 he my hand.. NOT!

[sewerswan]

This was your best video in the series

[anthonyvaldez]

You didn't do to remove the bracket
I did need to and it the same set up

[rurban]

You called up Toyota and what was free?

[eddiegonzalez]

1300.00 I payed for this pump!

So angry

[renebarahona]

I pay 195 00 $ just for check up 201 code