Use THIS When Installing Soft Close Drawer Slides | Full Extension Drawer Slides | USE THIS TOOL!!

Replace your old, builder quality drawer slides with new, soft-close drawer slides. This upgrade is easy with one simple tool.

VW Beetle Videos:

D100 Videos:

Charger Videos:

DIY Projects:

Fitness Videos:

You can always find me here:
Instagram: @Moonbuilt
Twitter: @BuiltMoon

MoonBuilt Garage Merchandise - T-Shirts and More:

Tools Used For This Build:

What I Use To Film:

Affiliate Links:

Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! All opinions are my own and presented without editorial input from outside sources.

Disclaimer:
Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, we cannot guarantee against improper use or unauthorized modifications of this information. MoonBuilt Garage and WJM Industries LLC assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. MoonBuilt Garage and WJM Industries LLC recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MoonBuilt Garage or WJM Industries LLC.

Produced and owned by WJM Industries LLC

#MoonBuiltGarage #DIY #howto #woodworking #storage #storageideas #storagesolutions #woodflag #americanflag #rusticflag #woodshop #garageshop #shopideas #workshop #tools #maker #woodworkingtools #tooltip #woodworkingprojects #garagelife #garagefun #garagenight #builder

[muhammadasadkhan]

since you mentioned the parallel issue front and back, tell us - how to problem solve that as well. I think the major flaw in YouTube videos I see is that they describe the Perfect Scenarios. Click, pop, drill and done. But the vast majority of people are facing issues that they don't know what to do with it. Talk about common mistakes, measurement mistakes or what to look out for. How do you measure properly. etc etc. That is what makes Youtube videos much better

[Vegeta-ppvm]

I never saw the older vid but this one is gold ...🎉🎉🎉🎉
Thanks 👍

[saneauto]

Ive been contemplating redoing a lot of my older repair videos as well

[ollipop]

Im so frustrated. The slides i got from amazon seem too thick or maybe my drawers are an awkward size but theyre uneven and somewhere theyre rubbing. Ive pulled them out and pulled everything apart about 3 times now. Im so close to taking a hammer to the whole bathroom vanity

[Texasing]

I found the builder did not keep the mounting tracks level and at same height. Also the slides were not centered and appeared to be not squared. Lost one originally installed slide when i t eventually came off track (tough to slide for 2 years, but got worse). After I squared and leveled I still can't get the new soft close mechanisms to work. It's a kitchen waste can drawer. The brackets were mounted about 7-8" above the cabinet base. Should they have been mounted lower?

[ragsbombadil]

How do you open that cabinet doors above the "Eat" sign?

[WVRebel]

I’ve been looking for this style soft close slides. My drawers are only 20” but the cabinet is 23.5”. I need the front and rear mounted slide, just like the ones you use in this video. Would a 22” slide be the proper size for me to use, even though they would be longer than the drawers themselves? Most things I’ve read said nothing longer than the drawer but I’m afraid a 20” won’t reach far enough with the rear mounts and would only be holding on the mount by about 1/4” or less.

[steveo]

How do you measure the space, how should I measure the drawers like wtf

[seanjohnston]

How many problems you had so far? These slides are a nightmare. Drawers definitely pop out of those brackets. A lot of resistance with them when first pulling open. Drawers have to be perfect conditions for them to work. I could go on and on.
Under mount is is night and day better. Zero problems and they don’t need perfect conditions to operate. They can compensate for a lot. Side mount soft is trash 🗑️