Cadillac Car Door Logo Lights Installation

These custom LED logo light assemblies are easy to install being a direct replacement with a plug-and-play connection. They require no vehicle modification for fitting or installation, and can be just as easily switched back to the original lights. The LED logo light will show the projection on the ground when the door is open and closed, turning off automatically once the door is shut. Check out below for model and year compatibility as well as step-by-step installation instructions.

🟠 Compatible Cadillac models
SRX: 2010-2017
XTS: 2009-2016
ATS: 2013-2017
XT4: 2018-2019
XT5: 2016-2019
XT6: 2019

🔵 Installation Instructions:
1. Use a flat head screwdriver to pry and remove, then disconnect the original light assembly.
2. Plug in the replacement logo light assembly by matching the connector and plug sides.
3. Put the new assembly with original trim piece back into the car door until it pops into place.
4. Test the light by opening and closing your vehicle door.
5. If not working, check connection is good with the connector and plug. If the logo is upside down, switch to the other projector assembly as one is for the right and one is for the left.

They recommend not leaving your door open longer than a few minutes, as the film used to project the logo light can be damaged from the increasing heat. If your film is damaged, you do have the ability to remove it allowing plain white illumination instead.

🌐 CONNECT:

#cadillac #welcomelights #puddlelights #courtesylights #logolights #afire

[ronaldbirl]

I recently installed these in my 2013 ATS 3.6 and they look sweet at night.

[edwardandrade]

2013 srx Car Door LED Logo Projector Ghost Shadow Light is there a fuse

[onetruedodd]

My four pack came with 3 lefts and 1 right. I was annoyed. Then, I discovered my 2014 base XTS only has courtesy lights on the front two doors! So, win?

[delitetheslowjamking]

Will this light work on a 2018 Cadilac CTS

[AliImran-kkfr]

I don't want to damage the hazard light trims or the light any advice on smooth removal...

[kaceeenglish]

My lights are not work at all on bottom of door. Do you know where the fuse is or any idea what problem is

[roberthint]

Do you by chance have an updated link? The two provide no longer work. I would appreciate it

[DavidJimenez-rvcd]

Is there any that will work for a 93.... please anybody let me know!!!

[tyler]

why would you not show how to dislodge the actual bulb?! i am struggling i’m so stupid :(

[trashout]

Can’t find these anywhere for 2009 CTS-V sedan

[nwtf]

Installed these on 2018 ATS and they blink three times and go out. Had to switch back to factory lights

[johnathonwalker]

I have a 2007 cadilliac DTS and my puddle lights are a different size and ha e a clear plastic cover that holds it in so there’s nothing to attach it to what would be a good way to secure it

[brieyannarose]

I’m worried about installing them on my 2001 DeVille because the lights are curved surface not flat mounting. Do you think it will work or I shouldn’t try?

[Jacblack]

Will it work on a 2008 Cadillac Escalade?

[konchuzthawt]

Need to find these for my XTS! I've got a 2018 and apparently these won't fit.... 😭

[tiffanyg]

I just bought these on Wish with the Batman logo haven’t received them yet! I have a Cadillac CTS if these ones are bank I might just go with the Cadillac pedal lights

[tomasjaramillo]

Need !!! I got a 81 Coupe Deville and 2000 Deville

[mvpjsj]

Wish the film was more durable. Driver side door logo burned out twice. I'm about to just remove it and leave the white light. Passenger one is still good tho

[ZRZ]

Shout out Wisco, I’m from Kenosha ✊🏽 wish these would fit my 04 DeVille

[Gypzee]

when i bought my caddy 2nd hand it had these lights and i thought it was cool but they haven't came back on after the 1st week.. how do i make them come back on? did i push the wrong button to turn them off?